Front wheel identification

Post Reply
Luke400
Settled in member
Reactions:
Posts: 29
Joined: Sat May 03, 2014 8:27 am
Front wheel identification

Post by Luke400 » Thu May 28, 2015 6:42 pm

Hi all, I took some wheels today to get painted for my nc29 ( I have 2 pairs), I received them back today and was comparing the front wheel that was painted to the one that wasn't only to noticed they were different sizes, both are honda 17" but one is 3.5" and the other is 3.0"! Anyone got any ideas what honda bikes take 3.00" size wheel? Appearance is exact to the nc29 (dual disc) . I was think an nsr 250 but not sure.

Thanks in advance

User avatar
jim157
Moderators
Moderators
Reactions:
Posts: 1923
Joined: Mon May 17, 2010 7:15 pm
Bike owned: A few small ones
Location: Norwich
Re: Front wheel identification

Post by jim157 » Thu May 28, 2015 8:40 pm

Yep, nsr250 mc18/21/28 and cbr250 mc22 use the 3" fronts afaik.
AUTOEXEC.TWAT

Luke400
Settled in member
Reactions:
Posts: 29
Joined: Sat May 03, 2014 8:27 am
Re: Front wheel identification

Post by Luke400 » Thu May 28, 2015 8:53 pm

Thanks Jim, totally miffed why someone put it on the nc29 I brought to restore.

RaulMAB
Settled in member
Reactions:
Posts: 4
Joined: Tue Oct 30, 2018 9:46 pm
Location: Croatia
Contact:
Front wheel identification

Post by RaulMAB » Sun Nov 18, 2018 7:25 pm

Should have taken pix but...any how, which side and between what parts does the front wheel spacer go thats abut 1 1/4" long and about 3/4" in diameter, the one thats straight no shoulder? Appreciate.

VicMAB
Settled in member
Reactions:
Posts: 4
Joined: Fri May 03, 2019 4:02 pm
Location: Gambia
Contact:
Front wheel identification

Post by VicMAB » Sun May 19, 2019 9:48 am

Looking at the wheel from the front right side of wheel where the disc is: spacer with the lip then dust seal then your spacer then dustseal. You spacer apparently goes inside brake caliper between the dust seals..


zoz


Post Reply

Return to “General”