My RVF400 - A.K.A MONEYPIT (NOW FINISHED P5 !!)
- Micro Monkey
- Site Supporter
- Reactions:
- Posts: 168
- Joined: Thu May 15, 2008 4:42 pm
- Bike owned: CG125, RVF400, YZF1000SP, 996
- Location: Gloucester
My RVF400 - A.K.A MONEYPIT (NOW FINISHED P5 !!)
Almost finished my rebuild of my rvf minus the carbon airtubes and carbon infills that are on order. Have tried to keep it fairly standard looking and i am fairly happy with the result so far.
Maxton Forks
Maxton Race Shock
Mercury Twin Stack Full Race Exhaust
NHK Steering Damper
Brembo 16mm R1 Radial Master Cylinder
EBC Prolites (Now removed as the blue rotors clashed)
Nissin SP1 Calipers
Hel Braided Hoses
Hel Radial Adaptor
Pazzo Brake And Clutch Levers
Berik Master Cylinder Cover
HRC Cdi
HRC Coolant Reservoir
HRC Rear Brake Reservoir
Rick Oliver/ SES Rearsets
Titanium Gear Shift Rod
Electrex Rectifier
Carbon Front Fender (Tyga)
Carbon Rear Hugger/Chainguard (Unknown but bought from Japan)
Carbon Heel Plates (I Made them)
Carbon Exhaust Hangar (Bought Off Ebay)
Carbon Fairing Infills (Tyga)
Carbon Tank Protector (Unknown)
Carbon Front Reservoir Mount (I made It)
Carbon Airtubes (Tyga)
Carbon Tax Disc Holder (Fibre Lyte)
Carbon Yoke Protector (Skur)
Carbon Clock Surround (Fibre Lyte)
Tyga Steel Screen Brace
Tyga Lock Stop Reducer
Sparco Billet Fuel Cap
MRA Airflow Screen
Renthal Medium Superbike Grips
Redial MPH Conversion
Honda Locking Valve Caps
Single Seat Cowl
Alloy Preload Adjusters
Probolt Alloy/Stainless Steel/Titanium fasteners throughout
Probolt Bar Ends
Carbs Running 115 main jets with 0.5 washers under needles.
Had Apex Clipons but prefered the feel of the bike with the standard bars.
Next Purchase: Magteks or Dymags if a set come up cheap enough, Quick action throttle
Maxton Forks
Maxton Race Shock
Mercury Twin Stack Full Race Exhaust
NHK Steering Damper
Brembo 16mm R1 Radial Master Cylinder
EBC Prolites (Now removed as the blue rotors clashed)
Nissin SP1 Calipers
Hel Braided Hoses
Hel Radial Adaptor
Pazzo Brake And Clutch Levers
Berik Master Cylinder Cover
HRC Cdi
HRC Coolant Reservoir
HRC Rear Brake Reservoir
Rick Oliver/ SES Rearsets
Titanium Gear Shift Rod
Electrex Rectifier
Carbon Front Fender (Tyga)
Carbon Rear Hugger/Chainguard (Unknown but bought from Japan)
Carbon Heel Plates (I Made them)
Carbon Exhaust Hangar (Bought Off Ebay)
Carbon Fairing Infills (Tyga)
Carbon Tank Protector (Unknown)
Carbon Front Reservoir Mount (I made It)
Carbon Airtubes (Tyga)
Carbon Tax Disc Holder (Fibre Lyte)
Carbon Yoke Protector (Skur)
Carbon Clock Surround (Fibre Lyte)
Tyga Steel Screen Brace
Tyga Lock Stop Reducer
Sparco Billet Fuel Cap
MRA Airflow Screen
Renthal Medium Superbike Grips
Redial MPH Conversion
Honda Locking Valve Caps
Single Seat Cowl
Alloy Preload Adjusters
Probolt Alloy/Stainless Steel/Titanium fasteners throughout
Probolt Bar Ends
Carbs Running 115 main jets with 0.5 washers under needles.
Had Apex Clipons but prefered the feel of the bike with the standard bars.
Next Purchase: Magteks or Dymags if a set come up cheap enough, Quick action throttle
Last edited by Micro Monkey on Thu Jun 25, 2009 12:06 am, edited 18 times in total.
- Psychosomatic88
- Site Supporter
- Reactions:
- Posts: 233
- Joined: Fri May 16, 2008 10:39 pm
- Location: Lydney, Gloucestershire
Re: What do you think of my rvf
A few very nice additions there!
Not keen on the rear sets but the Mercury more than makes up for it!
More info on the hugger and exhaust please
Not keen on the rear sets but the Mercury more than makes up for it!
More info on the hugger and exhaust please
Going on the internet is like owning a gun... Just point, click, then shit your pants waiting for the Police to turn up.
-
- Settled in member
- Reactions:
- Posts: 67
- Joined: Tue Apr 29, 2008 9:49 pm
Re: What do you think of my rvf
perfect.
- royster81
- NWAA Supporter
- Reactions:
- Posts: 2509
- Joined: Wed Apr 30, 2008 8:04 pm
- Bike owned: VFR400R-L NC30 CBR400RR-R NC29
- Location: Belfast,Northern Ireland
Re: What do you think of my rvf
thats really nice ..
It's not having what you want but wanting what you've got....Loud ,Proud and Modified ....
-
- Site Supporter
- Reactions:
- Posts: 1670
- Joined: Tue Apr 29, 2008 8:56 pm
- Bike owned: NC30 Road, SV650 Race
- Location: Hampshire, Wichester
Re: What do you think of my rvf
very nice bike mate, i dint know tyga did carbon infills, do they do them for the vfr now aswell?
thats the same hugger smev has, although he had to cut his slightly, dont know what make it is tho
thats the same hugger smev has, although he had to cut his slightly, dont know what make it is tho
- Micro Monkey
- Site Supporter
- Reactions:
- Posts: 168
- Joined: Thu May 15, 2008 4:42 pm
- Bike owned: CG125, RVF400, YZF1000SP, 996
- Location: Gloucester
Re: What do you think of my rvf
Psychosomatic88, What do you want to know ?. The carbon hugger/chainguard i bought from japan through yahoo auctions. I have a japanese friend who buys me the stuff and ships it to me, Much cheaper than okshon. The make of it though i am not sure. Regarding the exhaust just pm me with questions, It's not quite as loud as my MHP SP1 system i had but it does sound fabulous and is built just as well as the MHP.
-
- Settled in member
- Reactions:
- Posts: 153
- Joined: Wed Apr 30, 2008 10:46 pm
Re: What do you think of my rvf
Very nice bike mate.
- superlite
- Site Supporter
- Reactions:
- Posts: 748
- Joined: Wed Apr 30, 2008 11:52 pm
- Bike owned: TLS, LB80 x 2
- Location: Australia
- Contact:
Re: What do you think of my rvf
Looks like a Coerce, but a bit hard to tell from the pics.Micro Monkey wrote:The carbon hugger/chainguard ...The make of it though i am not sure.
Nice bike, plenty of bling happening!
'Take it to the Back'
-
- Site Supporter
- Reactions:
- Posts: 1027
- Joined: Wed Apr 30, 2008 8:40 pm
- Bike owned: zx9r c1
- Location: killin,scotland
Re: What do you think of my rvf
looks great!!!!!!
quite a lot of mods there,what bike are the pazzo levers from,just for reference?
william
quite a lot of mods there,what bike are the pazzo levers from,just for reference?
william
please,god,....give me the chance to prove that winning the lottery won't spoil me!!!
- Micro Monkey
- Site Supporter
- Reactions:
- Posts: 168
- Joined: Thu May 15, 2008 4:42 pm
- Bike owned: CG125, RVF400, YZF1000SP, 996
- Location: Gloucester
Re: What do you think of my rvf
The clutch lever is for a cbr600 f4i and the brake lever is for a 2004 yamaha R1.