NC30 Race Replica Build (RC30)
- tmjns796
- Site Supporter
- Reactions:
- Posts: 83
- Joined: Thu Jan 31, 2013 6:18 pm
- Bike owned: NC30
- Location: Powys / Shropshire
- Contact:
Re: NC30 Race Replica Build (RC30)
I've spoken to him over the phone and he is a top bloke. knows his onions! I shall be contacting him soon regarding a 'ram air' set up / open carbs, and try and get some pics of the RC30 seat unit he advertises.chuckles78 wrote:Wasn't saying anything bad about rick o's rads they are top quality, just saying that these rads look similar and are claimed to have the same 40% better cooling capacity but are a lot cheaper for those on a tighter budget... So apologies to Rick if it sounded that way cos Ricks parts are awesome quality and I would never say otherwise as he is a top bloke..
-
- Site Supporter
- Reactions:
- Posts: 76
- Joined: Wed Jan 16, 2013 10:47 am
- Bike owned: repsol nc30
- Location: near cardiff south wales
Re: NC30 Race Replica Build (RC30)
What do you think of these Tom , you wouldn't happen to know the tank design to go with them??
http://image.dhgate.com/albu_285093315_00/1.0x0.jpg
http://image.dhgate.com/albu_285093315_00/1.0x0.jpg
- tmjns796
- Site Supporter
- Reactions:
- Posts: 83
- Joined: Thu Jan 31, 2013 6:18 pm
- Bike owned: NC30
- Location: Powys / Shropshire
- Contact:
Re: NC30 Race Replica Build (RC30)
I think they look smart bud, I sent you a pic of the old style virgin ones, like on the aprilia rs125's but i havnt seen the red / black fade ones before. I like the OKI single headlight fairing
-
- Site Supporter
- Reactions:
- Posts: 76
- Joined: Wed Jan 16, 2013 10:47 am
- Bike owned: repsol nc30
- Location: near cardiff south wales
Re: NC30 Race Replica Build (RC30)
They are off the 2007-9 bsb yamaha but I cant seem to source a pic of the tank for them:( I just wanted to be different wonder if my orange front wheel would go with them though didn't really want a red one...
- tmjns796
- Site Supporter
- Reactions:
- Posts: 83
- Joined: Thu Jan 31, 2013 6:18 pm
- Bike owned: NC30
- Location: Powys / Shropshire
- Contact:
Re: NC30 Race Replica Build (RC30)
black wheels would look ok with that I guess, It will be different! not many of them about. dont fancy castrol or rothmans?
-
- Site Supporter
- Reactions:
- Posts: 76
- Joined: Wed Jan 16, 2013 10:47 am
- Bike owned: repsol nc30
- Location: near cardiff south wales
Re: NC30 Race Replica Build (RC30)
nahh mate think I will stick with them as like you said mine will be different :) if its too much trouble will go with the repsol but there is a few of them about...
- tmjns796
- Site Supporter
- Reactions:
- Posts: 83
- Joined: Thu Jan 31, 2013 6:18 pm
- Bike owned: NC30
- Location: Powys / Shropshire
- Contact:
Re: NC30 Race Replica Build (RC30)
common as muck those repsol schemes haha! almost as common as red/white/blue!
Rear caliper / master cylinder, hose and pads arrived yesterday. still waiting on my rectifier and plug, and wheels e.t.c from the powder coaters.
Rear caliper / master cylinder, hose and pads arrived yesterday. still waiting on my rectifier and plug, and wheels e.t.c from the powder coaters.
-
- Site Supporter
- Reactions:
- Posts: 76
- Joined: Wed Jan 16, 2013 10:47 am
- Bike owned: repsol nc30
- Location: near cardiff south wales
Re: NC30 Race Replica Build (RC30)
your not wrong lol....
- tmjns796
- Site Supporter
- Reactions:
- Posts: 83
- Joined: Thu Jan 31, 2013 6:18 pm
- Bike owned: NC30
- Location: Powys / Shropshire
- Contact:
Re: NC30 Race Replica Build (RC30)
Dropped off the tank and fender yesterday at webb racing products in towyn. He makes all the fairings himself from a wide selection of moulds. His brother paints helmets for a living and he is spraying up the lot on my selected replica scheme. The inside of the faring is going to be re enforced with some black weave type stuff that prevents cracking. All decals for the forks e.t c are being made up, but the fairing decals will be airbrushed on so they will last longer than 7 year vinyl.
Can't wait to see them!
Can't wait to see them!
- tmjns796
- Site Supporter
- Reactions:
- Posts: 83
- Joined: Thu Jan 31, 2013 6:18 pm
- Bike owned: NC30
- Location: Powys / Shropshire
- Contact:
Re: NC30 Race Replica Build (RC30)
Its been a while...
Since I have been waiting on parts I decided to get the RVF out and start to clean her up for Carmarthen show, It hasn't had the fairings off since I got it. Definitely due a good clean up!
Ive just gotten the wheels and sea subframe back from the powder coaters, they had been snowed under.
I am really happy with the finish, they had to order in the dull gold specially, I think it looks great!
I'm popping the tires back on his week, new bearings then back on the bike.
Another couple of weeks and I shall have the fairings home and finished, ready to go on. Its frustrating waiting for things to be done! I guess you just have to wait for quality products!
Since I have been waiting on parts I decided to get the RVF out and start to clean her up for Carmarthen show, It hasn't had the fairings off since I got it. Definitely due a good clean up!
Ive just gotten the wheels and sea subframe back from the powder coaters, they had been snowed under.
I am really happy with the finish, they had to order in the dull gold specially, I think it looks great!
I'm popping the tires back on his week, new bearings then back on the bike.
Another couple of weeks and I shall have the fairings home and finished, ready to go on. Its frustrating waiting for things to be done! I guess you just have to wait for quality products!