Another 'spare' bike

This section is reserved for members on the SITE SUPPORTERS group only. Each supporter can post pics of their bikes for all to view. Standard members can read and reply, but the post author has full control over his thread and can edit, delete & lock at will
User avatar
Tim400GB
Site Supporter
Site Supporter
Reactions:
Posts: 1168
Joined: Mon Jan 04, 2010 7:24 pm
Bike owned: 1 x NC30, 2 x NC32.5,
Location: SE Greater London
Re: Another 'spare' bike

Post by Tim400GB » Thu Nov 05, 2015 12:35 am

Not tested properly yet, but yeah after speaking to a few guys at work who know far more than I do all said the same.
Need to get the bike to brands to get it noise tested to get a bench mark.

User avatar
Drunkn Munky
Site Supporter
Site Supporter
Reactions:
Posts: 10328
Joined: Thu May 01, 2008 9:37 am
Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
Location: Kent
Re: Another 'spare' bike

Post by Drunkn Munky » Thu Nov 05, 2015 10:43 am

What ID is your outlet? I got various sized baffles here.

There be some weekend trackdays coming up now at brands, just get the bike along and test it

User avatar
Drunkn Munky
Site Supporter
Site Supporter
Reactions:
Posts: 10328
Joined: Thu May 01, 2008 9:37 am
Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
Location: Kent
Re: Another 'spare' bike

Post by Drunkn Munky » Thu Nov 05, 2015 10:47 am

Just looked back through your thread and are you using that tsr can on a rvf system? I passed with ease at brands with that exact can on a rvf system

User avatar
Tim400GB
Site Supporter
Site Supporter
Reactions:
Posts: 1168
Joined: Mon Jan 04, 2010 7:24 pm
Bike owned: 1 x NC30, 2 x NC32.5,
Location: SE Greater London
Re: Another 'spare' bike

Post by Tim400GB » Thu Nov 05, 2015 3:44 pm

With ease?! Must be the open carbs.

reverse cylinder jim
Site Supporter
Site Supporter
Reactions:
Posts: 682
Joined: Sun Feb 28, 2010 5:22 pm
Re: Another 'spare' bike

Post by reverse cylinder jim » Thu Nov 05, 2015 8:14 pm

Timon wrote:With ease?! Must be the open carbs.
You could be right there Timon
Really struggled with noise with my track bike years ago once I went to open carbs. Mine always sailed through before I went down that route. Instead of using a baffle I always used some kind of restriction in where the can fitted to the system to pass noise test. That way it will pass without having to have a baffle present as if the Marshall/noise tester see's a baffle they usually write it on the sticker they stick to your bike so you can't remove the baffle after the noise test.

User avatar
Tim400GB
Site Supporter
Site Supporter
Reactions:
Posts: 1168
Joined: Mon Jan 04, 2010 7:24 pm
Bike owned: 1 x NC30, 2 x NC32.5,
Location: SE Greater London
Re: Another 'spare' bike

Post by Tim400GB » Sun Jun 19, 2016 7:13 pm

Well the baffle worked, down from 106 to 100! and I actually managed to give the bike a shake down
Bike behaved rather well, think it needs a better rider though

The only good picture really
Image

User avatar
Tim400GB
Site Supporter
Site Supporter
Reactions:
Posts: 1168
Joined: Mon Jan 04, 2010 7:24 pm
Bike owned: 1 x NC30, 2 x NC32.5,
Location: SE Greater London
Re: Another 'spare' bike

Post by Tim400GB » Thu Nov 03, 2016 12:27 pm

So the bikes been used a handful of times, which means its needs more money spending on it.
Not so much of a budget bike anymore, that said it hasn't been that for a while now.

New upgrades in the form of a pair of PVM mag wheels.

Image
Image
Image

conical rear wheel spacer
Image
Image

New Ti bolts from RLR for the front disks
Image

Just need to pick the tyres up from Tony, buy & skim some bolts down for the rear disk, make some new front wheel spacers and fit a Rick Oliver chain spacer kit before I can fit them

User avatar
Tim400GB
Site Supporter
Site Supporter
Reactions:
Posts: 1168
Joined: Mon Jan 04, 2010 7:24 pm
Bike owned: 1 x NC30, 2 x NC32.5,
Location: SE Greater London
Re: Another 'spare' bike

Post by Tim400GB » Sat Nov 05, 2016 5:33 pm

Tyres picked up, need to get the disks swapped over before I can fit and balance them.

Image

Titanium rear disk bolts skimmed and fitted.

Image
Image

Was just going to fit a chain spacer kit to clear the tyre but now I'm thinking of replacing them with a 520 set and putting the 525s on my other rolling chassis.

User avatar
Tim400GB
Site Supporter
Site Supporter
Reactions:
Posts: 1168
Joined: Mon Jan 04, 2010 7:24 pm
Bike owned: 1 x NC30, 2 x NC32.5,
Location: SE Greater London
Re: Another 'spare' bike

Post by Tim400GB » Sun Nov 13, 2016 10:32 pm

Getting somewhere with the 'endurance' front wheel spindle

Image

User avatar
Tim400GB
Site Supporter
Site Supporter
Reactions:
Posts: 1168
Joined: Mon Jan 04, 2010 7:24 pm
Bike owned: 1 x NC30, 2 x NC32.5,
Location: SE Greater London
Re: Another 'spare' bike

Post by Tim400GB » Wed Nov 16, 2016 12:00 pm

Got the rvf front wheel off the bike and then got the disc's off so I could put them onto the PVM

Here it is all bolted up with the new Ti bolts. Need to get the Bridgeport valve and tyre fitted so I can make some spacers to centre it up.

Image


Post Reply