Number 9 - What was and what shall be

This section is reserved for members on the SITE SUPPORTERS group only. Each supporter can post pics of their bikes for all to view. Standard members can read and reply, but the post author has full control over his thread and can edit, delete & lock at will
Post Reply
Tomzed
Site Supporter
Site Supporter
Reactions:
Posts: 198
Joined: Wed Feb 01, 2012 11:42 am
Bike owned: Yamaha wr125x and Nc30
Location: Sheffield
Re: Number 9 - What was and what shall be

Post by Tomzed » Tue Jun 26, 2012 2:18 pm

Doesn't look like the ethos I have

User avatar
CMSMJ1
Moderators
Moderators
Reactions:
Posts: 9806
Joined: Thu May 01, 2008 9:42 am
Bike owned: NC30-No9
Location: Chesterfield, United Kingdom
Re: Number 9 - What was and what shall be

Post by CMSMJ1 » Tue Jun 26, 2012 2:22 pm

I've had an Ethos - it is not one of them.

The welds are very nice on it, it if sully spring and uses collars to fit to the ports - like the Tyga does and the HRC RC45 one I had for a while.

It has a nice carbon can with it - no badges or other markings I can see.. I am sure I put it in the exhaust thread when I got it.
IMPERATOR REX ANGLORUM

The V4 is the law..

NC30 - No9 - my old mate

User avatar
ibby4585
Site Supporter
Site Supporter
Reactions:
Posts: 4776
Joined: Tue Jun 16, 2009 1:42 pm
Bike owned: SP's
Location: oxfordshire
Re: Number 9 - What was and what shall be

Post by ibby4585 » Tue Jun 26, 2012 5:22 pm

Looks like an early Tyga system I think.

User avatar
missis sumner
Site Supporter
Site Supporter
Reactions:
Posts: 243
Joined: Thu Sep 01, 2011 12:09 pm
Bike owned: NC30 + Teapot
Location: Wigan
Re: Number 9 - What was and what shall be

Post by missis sumner » Tue Jun 26, 2012 5:33 pm

That collection of pipes looks a lot like the collection of pipes I have lying on my "black-and-wrecker" workbench, waiting for polishing.

Mine's a Tyga.

I can take photos if you wish?

User avatar
CMSMJ1
Moderators
Moderators
Reactions:
Posts: 9806
Joined: Thu May 01, 2008 9:42 am
Bike owned: NC30-No9
Location: Chesterfield, United Kingdom
Re: Number 9 - What was and what shall be

Post by CMSMJ1 » Tue Jun 26, 2012 5:46 pm

Early Tyga would make sense. Apart from the Hiperform, which is outstanding quality, this one is right up there.

@ Missis - aye, pics are always good!
IMPERATOR REX ANGLORUM

The V4 is the law..

NC30 - No9 - my old mate

User avatar
missis sumner
Site Supporter
Site Supporter
Reactions:
Posts: 243
Joined: Thu Sep 01, 2011 12:09 pm
Bike owned: NC30 + Teapot
Location: Wigan
Re: Number 9 - What was and what shall be

Post by missis sumner » Tue Jun 26, 2012 5:56 pm

Ok - my front two pipes and first collector are still on the bike though - the joint was a bit stubborn, and they didn't really need to come off... and the bike is stored in the garage behind my car, which has a flat battery, so photos of that part of the system may be difficult. However, I can get photos of the rear pipes tonight. :grin:

But the system does look an awful lot like your photo on the exhaust thread.

User avatar
ibby4585
Site Supporter
Site Supporter
Reactions:
Posts: 4776
Joined: Tue Jun 16, 2009 1:42 pm
Bike owned: SP's
Location: oxfordshire
Re: Number 9 - What was and what shall be

Post by ibby4585 » Tue Jun 26, 2012 6:04 pm

Here you go Mark Page 6 I reckon it's Tyga.

viewtopic.php?f=23&t=6071&start=50

Kris

User avatar
CMSMJ1
Moderators
Moderators
Reactions:
Posts: 9806
Joined: Thu May 01, 2008 9:42 am
Bike owned: NC30-No9
Location: Chesterfield, United Kingdom
Re: Number 9 - What was and what shall be

Post by CMSMJ1 » Tue Jun 26, 2012 6:12 pm

I reckon you are right mate.

I saw Paul (diddlydingo) not so long back. Top dude...it may well be that this is the same one...as we did do a fair bit of dealing back in the day!
IMPERATOR REX ANGLORUM

The V4 is the law..

NC30 - No9 - my old mate

User avatar
missis sumner
Site Supporter
Site Supporter
Reactions:
Posts: 243
Joined: Thu Sep 01, 2011 12:09 pm
Bike owned: NC30 + Teapot
Location: Wigan
Re: Number 9 - What was and what shall be

Post by missis sumner » Tue Jun 26, 2012 6:18 pm

Just looking at it, mine's slightly different - my final collector looks a longer pipe with an extra bend/weld in it, and the collector from the front cylinders shorter and maybe not as straight either, IYSWIM?

Image

I'll try to take better photos when I get home.

Edit:

Mine look's more like this:

http://i746.photobucket.com/albums/xx10 ... 701316.jpg

(Apart from the end-can.)

User avatar
missis sumner
Site Supporter
Site Supporter
Reactions:
Posts: 243
Joined: Thu Sep 01, 2011 12:09 pm
Bike owned: NC30 + Teapot
Location: Wigan
Re: Number 9 - What was and what shall be

Post by missis sumner » Wed Jun 27, 2012 10:36 am

Photo of "half" of my full system:

Image

My end can looks really bent there... doesn't look so bad on the bike, honest! :lol:


Post Reply