SELEXON'S NC29 Pre Modern Racer

This section is reserved for members on the SITE SUPPORTERS group only. Each supporter can post pics of their bikes for all to view. Standard members can read and reply, but the post author has full control over his thread and can edit, delete & lock at will
Post Reply
User avatar
selexon
Site Supporter
Site Supporter
Reactions:
Posts: 140
Joined: Wed Dec 08, 2010 9:55 am
Bike owned: FZR400R 2TK, CBR400RR NC29
Location: Launceston, Tasmania
Contact:
Re: SELEXON'S NC29 Pre Modern Racer

Post by selexon » Thu Aug 25, 2011 1:36 pm

Finally got the bike back together over the last few days. So after installing the carrillo rods I took the opportunity to fit some 32 FCRs and a HRC spec cdi unit that I pick up from Japan.

The flatslides went on with no problems all I had to change was the throttle tube and cables that came with the carbs and change the main jets from 118s to 120s as there was a flat spot between 8,500 and 10,000 RPM when on full throttle. I also left off the flywheel stator. It makes a bit of a difference as the thing seems to pick up revs a lot quicker. just hope it doesn't change the engine breaking into corners by much.

I reckon the best thing about the changes is the rattle from the slides when its idling, makes the bike sound like its got real balls, I'm thinking the noise could be even better then a dry clutch ducati. :grin:

tanuki
Site Supporter
Site Supporter
Reactions:
Posts: 2807
Joined: Wed Apr 30, 2008 4:47 pm
Bike owned: CCM404 SM, CBR4/6 in progress
Location: Nottingham U.K
Re: SELEXON'S NC29 Pre Modern Racer

Post by tanuki » Mon Sep 05, 2011 2:58 pm

any news on the caliper / spacer bracket thingy?

User avatar
selexon
Site Supporter
Site Supporter
Reactions:
Posts: 140
Joined: Wed Dec 08, 2010 9:55 am
Bike owned: FZR400R 2TK, CBR400RR NC29
Location: Launceston, Tasmania
Contact:
Re: SELEXON'S NC29 Pre Modern Racer

Post by selexon » Sun Sep 11, 2011 10:04 am

tanuki wrote:any news on the caliper / spacer bracket thingy?
Mate haven't spent the hours in the w/shop the last few weeks. I have 3 weeks before my next race so hope to get stuck into it again, once I get onto it I will let you know.

tanuki
Site Supporter
Site Supporter
Reactions:
Posts: 2807
Joined: Wed Apr 30, 2008 4:47 pm
Bike owned: CCM404 SM, CBR4/6 in progress
Location: Nottingham U.K
Re: SELEXON'S NC29 Pre Modern Racer

Post by tanuki » Sun Sep 11, 2011 7:09 pm

Cool there is no rush.

User avatar
selexon
Site Supporter
Site Supporter
Reactions:
Posts: 140
Joined: Wed Dec 08, 2010 9:55 am
Bike owned: FZR400R 2TK, CBR400RR NC29
Location: Launceston, Tasmania
Contact:
Re: SELEXON'S NC29 Pre Modern Racer

Post by selexon » Thu Sep 22, 2011 9:33 am

Made some new alloy front axle spacers today.

L/H spacer was 34g now 10g
R/H spacer was 40g now 16g

Total saving of 48g from the front end's unsprung weight. only a few more 100g to go.

Image

tanuki
Site Supporter
Site Supporter
Reactions:
Posts: 2807
Joined: Wed Apr 30, 2008 4:47 pm
Bike owned: CCM404 SM, CBR4/6 in progress
Location: Nottingham U.K
Re: SELEXON'S NC29 Pre Modern Racer

Post by tanuki » Thu Sep 22, 2011 12:08 pm

I'm going to get some mate up for mine this year (to fir RVF forks) but I'm going to have them done captive.

User avatar
Drunkn Munky
Site Supporter
Site Supporter
Reactions:
Posts: 10328
Joined: Thu May 01, 2008 9:37 am
Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
Location: Kent
Re: SELEXON'S NC29 Pre Modern Racer

Post by Drunkn Munky » Thu Sep 22, 2011 1:14 pm

tanuki wrote:I'm going to get some mate up for mine this year (to fir RVF forks) but I'm going to have them done captive.
Rick sells em mate ;)

tanuki
Site Supporter
Site Supporter
Reactions:
Posts: 2807
Joined: Wed Apr 30, 2008 4:47 pm
Bike owned: CCM404 SM, CBR4/6 in progress
Location: Nottingham U.K
Re: SELEXON'S NC29 Pre Modern Racer

Post by tanuki » Thu Sep 22, 2011 7:46 pm

Ah does he, I was gonna ask kayla as I need a couple of spacers made for the subframe as well.

I'll price them both up.

Cheers though.

User avatar
selexon
Site Supporter
Site Supporter
Reactions:
Posts: 140
Joined: Wed Dec 08, 2010 9:55 am
Bike owned: FZR400R 2TK, CBR400RR NC29
Location: Launceston, Tasmania
Contact:
Re: SELEXON'S NC29 Pre Modern Racer

Post by selexon » Wed Sep 28, 2011 4:51 am

Does anyone know what std jetting would be for the FCR 32? As I have had the bike on the dyno the other day and there was fuck all happing below 8k. any ideas with what to start with?

User avatar
Cammo
Site Supporter
Site Supporter
Reactions:
Posts: 5524
Joined: Thu May 01, 2008 12:35 am
Bike owned: NC30
Location: Melbourne, Australia
Re: SELEXON'S NC29 Pre Modern Racer

Post by Cammo » Wed Sep 28, 2011 5:34 am

selexon wrote:Does anyone know what std jetting would be for the FCR 32? As I have had the bike on the dyno the other day and there was fuck all happing below 8k.
Problem is that running fcr's on 400's isn't very common so most peeps don't have a good jetting baseline to start from.

Show & Go has some good fcr jetting and tuning info on their website, under the 'keihin' section at the left of the page.

http://www.showandgo.com.au/

Oz member 'Pleiades' has a set of hrc fcr's on his nc29 racebike, might get some info there.
"It's just a ride" Bill Hicks


Post Reply