SELEXON'S NC29 Pre Modern Racer

[tanuki]

Awesome by budget won't go that far looking forward to the results

[Spike16]

superfinishing is on of the best things you can do to an engine if you got the budget, reduces wear from friction reduces load on componants and increases ur power output, really good stuff!

[selexon]

Things haven't been moving along quickly as I would like them so far. Mainly because the production off the Carrillo rods have taken extra few weeks. In the mean time I have been working on a new rear caliper bracket to mount the little Brembo caliper that I picked up.

here is the MK1 version. Still need to soften/round the edges and add a pivot mount for the swingarm slot.

[tanuki]

Cool, don't fancy making me one do you?

[selexon]

Cool, don't fancy making me one do you?

No problems at all, the more I get made the cheaper they will be.

The only thing you will have to do to get it to fit is machine 8mm of material from the top of the brake pads, as the caliper body is to tall so I've had to lift it 8mm from the hub so there is plenty of clearance.

[tanuki]

That's fine.
Any idea of cost?

[selexon]

No idea of cost yet, the machinist hasn't seen a drawing yet so i don't know if he has to redesign it or if its good to go. I should get a final drawing to him at the end of the week and then I can go from there.

[Drunkn Munky]

Put me down for one also

what brembo caliper are you using?

[Yakama]

I may be interested too but I too want to know what caliper it uses and where to get one.

[selexon]

Its a Brembo PF32 caliper 84mm center to center mounting. Its a Stock 916 rear unit.