RVF Endurance AM-PM Replica build
- Drunkn Munky
- Site Supporter
- Reactions:
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Re: RVF Endurance AM-PM Replica build
I know its a piss take, clare sends most of my stuff through her work which is all garantee'd next day and they charge well over the top for the service, hardly any of the stuff i send gets there next day. Courier companys are on the rob big time.
- Drunkn Munky
- Site Supporter
- Reactions:
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Re: RVF Endurance AM-PM Replica build
Took it out for a ride today, low down the fueling is intermitantly crap with the occasional stutter in the midrange, i still need to work on that carb me thinks. WOT is great and no issues there at all but i think i may drop back down to standard gearing, its currently +2 on the rear and hitting the limiter in 6th is far to easy.
Pic from today
And NC30 carbs off, HRC tray fitted ready for the open RVF carbs that should be arriving soon
Pic from today
And NC30 carbs off, HRC tray fitted ready for the open RVF carbs that should be arriving soon
- BillingCBR
- Site Supporter
- Reactions:
- Posts: 1043
- Joined: Sat Oct 10, 2009 10:36 pm
- Bike owned: '88 NC23, NC30, '98 R1, NC35
Re: RVF Endurance AM-PM Replica build
Looks fantastic mate, can't wait to see it properly finished, it'll run as good as it looks How does the HRC air tray attach? Just thinking there's no bolt points, so it looks like it'll rattle around :S
'89 CBR400RRJ and '91 VFR400R NC30 project
Neosophist - The NC30 doesn't go very well when it's on fire
Neosophist - The NC30 doesn't go very well when it's on fire
- Drunkn Munky
- Site Supporter
- Reactions:
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Re: RVF Endurance AM-PM Replica build
No chance of it rattling around, the scoop is cable tied to the top of the rad and the carbs pretty much sit down on the tray.
- Martin
- Familiar Member
- Reactions:
- Posts: 423
- Joined: Thu May 01, 2008 6:34 am
- Bike owned: Street Cripple Arghhhh
- Location: Plymouth, UK
Re: RVF Endurance AM-PM Replica build
Too spensiff!!!
- Drunkn Munky
- Site Supporter
- Reactions:
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Re: RVF Endurance AM-PM Replica build
Eureka ka ka ka ka ka ka open RVF carbs arrived this morning (thanks james) fitted them and once she fired i could just tell by the note of the exhausts that things were right. there was no idle adjustment on the carbs but even cold it will idle at just over 1k, anything below 1500 rpm on the old carbs would stall even when warm.
I still cant get my head round why the old carbs wouldnt play ball when they come directly off a running bike that run like a dream, i can only think it was down to the 2-3 months of them being in storage and the various rubbers had gone off. Just goes to show you can clean and setup a set of carbs many times and even when everything looks fine doesnt mean it is.
So just need to fix the sticky float on my set of RVF carbs then i shall set them up exaxctly the same as this set
Thanks to dave, neo and the rest of you that put up with my constant ramblings over these carbs
I still cant get my head round why the old carbs wouldnt play ball when they come directly off a running bike that run like a dream, i can only think it was down to the 2-3 months of them being in storage and the various rubbers had gone off. Just goes to show you can clean and setup a set of carbs many times and even when everything looks fine doesnt mean it is.
So just need to fix the sticky float on my set of RVF carbs then i shall set them up exaxctly the same as this set
Thanks to dave, neo and the rest of you that put up with my constant ramblings over these carbs
- porndoguk
- Site Supporter
- Reactions:
- Posts: 3293
- Joined: Wed Jun 16, 2010 11:17 pm
- Bike owned: NC30
- Location: Middle England
- Contact:
Re: RVF Endurance AM-PM Replica build
Tee,Drunkn Munky wrote:And one from the other side
I never realised until i look at it now how much that join in the nose cone annoys me, its gota go!
No air tray yet pal but then the postal service round here is crap, next day can sometimes be next week!
does our offer still stand on the nose cone
NC30 & NC23 33BHP Restrictors For Sale
£25 Inc P&P and donation to 400GB PM for more details
http://www.bikerstraining.com
Like us on Facebook for more information - First Bike on Scene - Emergency Response Skills - UK
£25 Inc P&P and donation to 400GB PM for more details
http://www.bikerstraining.com
Like us on Facebook for more information - First Bike on Scene - Emergency Response Skills - UK
-
- Settled in member
- Reactions:
- Posts: 118
- Joined: Sun Feb 27, 2011 11:02 am
- Bike owned: Honda RVF400
- Location: Sydney, Australia
Re: RVF Endurance AM-PM Replica build
i'm so hard right now.
- Drunkn Munky
- Site Supporter
- Reactions:
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Re: RVF Endurance AM-PM Replica build
Will wrote:i'm so hard right now.
Ricky: Yes mate although ive a feeling you will want it before i get round to replacing it, need to save some pennys. Dont forget that you will need RVF headlights and most likey the front stay aswell, and possibly the mid panels.
- porndoguk
- Site Supporter
- Reactions:
- Posts: 3293
- Joined: Wed Jun 16, 2010 11:17 pm
- Bike owned: NC30
- Location: Middle England
- Contact:
Re: RVF Endurance AM-PM Replica build
i wont be in a hurry i have a feeling it will be sold me before im ready to have it done anyway,Drunkn Munky wrote:Will wrote:i'm so hard right now.
Ricky: Yes mate although ive a feeling you will want it before i get round to replacing it, need to save some pennys. Dont forget that you will need RVF headlights and most likey the front stay aswell, and possibly the mid panels.
i shall wait paitently :D
NC30 & NC23 33BHP Restrictors For Sale
£25 Inc P&P and donation to 400GB PM for more details
http://www.bikerstraining.com
Like us on Facebook for more information - First Bike on Scene - Emergency Response Skills - UK
£25 Inc P&P and donation to 400GB PM for more details
http://www.bikerstraining.com
Like us on Facebook for more information - First Bike on Scene - Emergency Response Skills - UK