Page 2 of 2

Re: Compatibility between clutch starter and CDI

Posted: Thu Aug 10, 2017 9:14 am
by ylionel
Ok so, i have contact one garage this morning.

The girl said : Your motor is correct for your motorcycle, i have not has been changed.

But your number for the CDI is normally 32900-10D00 not 32900-10D60, you have a motorcycle 92, so your CDI has not compatibility for your problems !


So i will take a order for a CDI today :)

Thank's for your help !

Re: Compatibility between clutch starter and CDI

Posted: Wed Aug 16, 2017 10:23 am
by ylionel
I have received a GOOD CDI for my bandit 400

But doesen't work !

Can you help me ?

Re: Compatibility between clutch starter and CDI

Posted: Wed Aug 16, 2017 1:48 pm
by ylionel
Ok i have a spark but, this motor not start ! :/

I think my spark Do not arrive at the right time

you think it's my rotor ?

Re: Compatibility between clutch starter and CDI

Posted: Thu Aug 17, 2017 12:50 pm
by ventYl
IDK if timing wheel can be mounted wrong but you can check the timing. You need to remove valve cover and left engine cover (better tilt bike on right so no oil will drip out of engine). Details on process are described in workshop manual.

Also, are you sure your coils are wired up properly? Try to swap HT wires between coils (IIRC left coil should fire outer cylinders, right coil should fire inner two).