Bandit not starting

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
jumbo9211
One Hit Wonder
Reactions:
Posts: 1
Joined: Sun Jul 15, 2012 2:17 pm
Bandit not starting

Post by jumbo9211 » Sun Jul 15, 2012 2:23 pm

I bought a bandit 400 a couple of weeks ago and it started and ran fine, one morning would not start. Bought a new ignition pulser and ran fine after that.
Problem is was out riding, everything working fine when suddenly engine just cut out, and had to roll to a stop. Now it will not start, won't even turn over. Any ideas any one?

H D
Settled in member
Reactions:
Posts: 54
Joined: Thu Aug 11, 2011 1:53 am
Bike owned: Derbi Senda
Re: Bandit not starting

Post by H D » Mon Jul 16, 2012 11:43 am

Check your stand switch is working, or try to bypass it and see if it will start. Will it bump start?

suggsy
Settled in member
Reactions:
Posts: 4
Joined: Fri Oct 03, 2014 7:57 pm
Re: Bandit not starting

Post by suggsy » Sat Oct 11, 2014 7:53 pm

dose the starter motor work if not might be starter solinoid

CharlesPhillips
Settled in member
Reactions:
Posts: 7
Joined: Sun Nov 02, 2014 12:30 pm
Bike owned: suzuki Bandit 400VS
Re: Bandit not starting

Post by CharlesPhillips » Sun Nov 02, 2014 12:46 pm

My bike has a similar issue, but someone told me that most Suzuki's have a key ignition issue. So try this, when turning the key, wiggle and jiggle the key, sometime the ignition is a bit broken. :geek:


Post Reply