Project bandit

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
mactat2
Settled in member
Reactions:
Posts: 56
Joined: Wed May 13, 2009 12:00 am
Bike owned: gsf 400, yzf R6, vtr 1000
Location: Blackpool
Contact:
Re: Project bandit

Post by mactat2 » Wed Apr 04, 2012 9:55 pm

the rear mounts i dropped down from the foot peg mounts, the front from the engine casing bolts. Just finished re shaping the rear hugger too.......

Image


Image

also made these heel guard protectors
Image

Image

mactat2
Settled in member
Reactions:
Posts: 56
Joined: Wed May 13, 2009 12:00 am
Bike owned: gsf 400, yzf R6, vtr 1000
Location: Blackpool
Contact:
Re: Project bandit

Post by mactat2 » Thu Apr 05, 2012 1:20 pm

Here're a few more pics inc. the belly pan.....

rear bracket
Image

front bracket
Image

Hugger fitted
Image

Image

Image

Image

mactat2
Settled in member
Reactions:
Posts: 56
Joined: Wed May 13, 2009 12:00 am
Bike owned: gsf 400, yzf R6, vtr 1000
Location: Blackpool
Contact:
Re: Project bandit

Post by mactat2 » Sat Apr 07, 2012 8:40 am

Hopefully should have the graphics finished and fitted by sunday :grin: tankpads now made, just going to make a new yoke protector to match the tank pad now lol

mactat2
Settled in member
Reactions:
Posts: 56
Joined: Wed May 13, 2009 12:00 am
Bike owned: gsf 400, yzf R6, vtr 1000
Location: Blackpool
Contact:
Re: Project bandit

Post by mactat2 » Sat Apr 07, 2012 4:53 pm

Done a few more bits today, mainly getting the graphics finished.....and then deciding on designing a few more bits lol

here's how the tank pad turned out......
Image

Image

time permitting should be able to get all the graphics on tomorrow, then its just waiting for the replacement starter motor to arrive and getting that fitted :roll:

mactat2
Settled in member
Reactions:
Posts: 56
Joined: Wed May 13, 2009 12:00 am
Bike owned: gsf 400, yzf R6, vtr 1000
Location: Blackpool
Contact:
Re: Project bandit

Post by mactat2 » Sun Apr 08, 2012 12:44 pm

Nearly done, just needs a couple more question marks for the tail section and the idiot light surround doing

new yoke protector..
Image

Image

Image

Image

Image

Image

mactat2
Settled in member
Reactions:
Posts: 56
Joined: Wed May 13, 2009 12:00 am
Bike owned: gsf 400, yzf R6, vtr 1000
Location: Blackpool
Contact:
Re: Project bandit

Post by mactat2 » Wed Feb 20, 2013 8:12 am

Hi Guys, Possibly up for sale soon as the missus has decide she can only keep one bike so either the bandit or the r6 has to go :( the bandit has probably covered a max of 100-200 miles since completion. Runs and rides spot on and still mot'd and taxe'd till 05/13. If anyones interested let me know and i'll put all the details up. Must go to a good home if she does decide to sell it.
Last edited by mactat2 on Sat Mar 09, 2013 9:11 am, edited 1 time in total.

mactat2
Settled in member
Reactions:
Posts: 56
Joined: Wed May 13, 2009 12:00 am
Bike owned: gsf 400, yzf R6, vtr 1000
Location: Blackpool
Contact:
Re: Project bandit

Post by mactat2 » Wed Feb 20, 2013 5:56 pm

Here are a couplemore pics, unfortunatly due to the missus' working hours we only ever managed short rides out on it last year.

Image

Image

A quick list of whats been done to it.....

Goodridge stainless brake lines front and rear
rear caliper new seals
New Chain and Sprockets
New foot pegs x4
New brake pads (front)
Full carb strip,clean and set up
Renthal bars on risers
Kawasaki z750 headlight
Honda hornet custom belly pan
2006 Yamaha R6 Tail
Tail Tidy
Oxford gallileo led indicators
recovered R6 seats
Led rear brake light
Stainless engine bolts
new fork seals and dust covers
Modified rear hugger and front mudguard
Polished wheel rims
Full respray
Custom one off graphics
Kawasaki zx6r G2 rear master cylinder

I'm sure theres more but thats what i can remember off the top of my head

Now in the For Sale section


Post Reply