Hi guys,

Below is an ebay link to a set of GK76a float bowl gaskets I got in error - mines a 73a. If anyone from here wins I'll chuck in nearly all the o rings you need to overhall the carbs. Just missing 2 x 3.5mm rings which aren't too hard to locate.

I will include:

4 x BS010
4 x BS011
4 x 10mm by 1mm
2 x 3.5mm by 1mm

All are in Viton - just tell me when you pay your from here and I'll post the lot together. The gaskets cost me £29.45 and bidding starts at £15 so get em cheap!

Check the part number before you buy though please.


http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0312907697

where'd you find the gaskets, I need a set for my 73a.

Suzuki dealer up the road. If you find any 73a float bowl gaskets can you post the part number for me too please?

Cheers

Hi Logan,
The gk73 shares the same carb body as the Bandit4 BUT internals are different, you can order B4 gaskets from Suzuki uk No. 13258-44B00 as the B4 was officially imported.

Variablevalves suck wrote:Hi Logan,
The gk73 shares the same carb body as the Bandit4 BUT internals are different, you can order B4 gaskets from Suzuki uk No. 13258-44B00 as the B4 was officially imported.

Legend mate thanks for the info!