GK76a SP CDI
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
BB_158
- Site Supporter
- Reactions:
- Posts: 258
- Joined: Mon Jul 30, 2012 1:16 pm
- Bike owned: is half tidy
- Location: S Wales
GK76a SP CDI
Have a GK76a which I believe has been fitted with an SP motor & carbs. It starts and runs fine, and revs freely in neutral (above 8k). On a 10 mile test ride it pulls really strong up to 8k revs, then fluffs and won't rev any higher in any gear. Somebody who is into these suggested the cause is the wrong CDI, as they are different.
I've tried looking for an SP one but no luck. Does anyone know where I can source one or even borrow one to try?
Anyone experienced similar or any ideas what is going on?
Cheers
I've tried looking for an SP one but no luck. Does anyone know where I can source one or even borrow one to try?
Anyone experienced similar or any ideas what is going on?
Cheers
My other ride is another 400, Woohoo!... Doh
-
mechannibalism
- Settled in member
- Reactions:
- Posts: 53
- Joined: Fri Sep 21, 2018 10:12 pm
Re: GK76a SP CDI
It is possible but that being said you have to match the reluctor(sp) to the the CID so that maybe the problem. I am sure there are people in the UK that mod them. Let us know what the # are on the unit- eg. 32900-XXXXX Someone with a parts book can tell you.
-
MadMotoUK
- Familiar Member
- Reactions:
- Posts: 314
- Joined: Tue Nov 24, 2020 12:53 pm
- Bike owned: FZR400,600, CBR893
Re: GK76a SP CDI
The SP motor will need the SP CDI, it's different to the standard GK76a one.