Can't Get Past 8k rpm While riding
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Reactions:
- Posts: 6
- Joined: Mon May 27, 2019 4:41 pm
- Bike owned: 1993 Bandit 400
Re: Can't Get Past 8k rpm While riding
Yes I have managed to fix the issue by installing the plugs. Mind it still starts and idles without the choke.
-
- Familiar Member
- Reactions:
- Posts: 388
- Joined: Wed Jun 03, 2015 9:41 am
- Bike owned: GK73a SP CRM250 mk3
Re: Can't Get Past 8k rpm While riding
The carbs are meant to have the rubber bungs fitted for the idle circuit to work correctly. You need to increase your main jet size if you find improvements with them removed, due to race cans etc.
I proved this on the dyno. It will be hard to jet the bike at WOT with them removed.