Gk 76 fould plugs

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
Vampgk76
Settled in member
Reactions:
Posts: 5
Joined: Tue May 15, 2018 5:33 pm
Gk 76 fould plugs

Post by Vampgk76 » Fri May 18, 2018 9:50 am

My gk 76 keeps fouling the plugs . The carbs got a new kit in from litetek. The needle c clip
is in the second from top groove and the mixture screw 2 turns out .
Main jet 100#
Pilot jet 47.5#
The plugs are wet after about 10 minutes and the fan does not come on.
If I clean the plugs it starts and idles but, then it start to mis fire again. Do
I turn the mixture screw in or out ?

moforockband
Familiar Member
Reactions:
Posts: 388
Joined: Wed Jun 03, 2015 9:41 am
Bike owned: GK73a SP CRM250 mk3
Re: Gk 76 fould plugs

Post by moforockband » Sun May 20, 2018 1:54 pm

Wind them in to 1 3/4 turns. Make sure your carb balance is correct, idels around 1000rpm and has no air leaks.


Post Reply