Anyone interested in me doing a write up on my fork internals conversion
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Reactions:
- Posts: 85
- Joined: Fri Jun 19, 2015 6:14 am
Anyone interested in me doing a write up on my fork internals conversion
Anyone interested in me doing a write up on my fork internals conversion
if people are interested i can do a write up
Cheers
Nobbsie
if people are interested i can do a write up
Cheers
Nobbsie
- 4hundread
- Site Supporter
- Reactions:
- Posts: 286
- Joined: Sat Apr 03, 2010 8:03 pm
- Bike owned: 91 GSXR 400
- Location: Dundee
Re: Anyone interested in me doing a write up on my fork internals conversion
Aye, I would be. I haven't ridden my 76a in over a year but plan have it back the road April ish. Have a K9 rear shock in and am looking at doing something with the front end.Nobbsie wrote:Anyone interested in me doing a write up on my fork internals conversion
if people are interested i can do a write up
Cheers
Nobbsie
I have looked at using ZXR 400 internals on mine which gets you preload and rebound but not compression adjustment.
Sent from my SM-A510F using Tapatalk
-
- Settled in member
- Reactions:
- Posts: 85
- Joined: Fri Jun 19, 2015 6:14 am
Re: Anyone interested in me doing a write up on my fork internals conversion
Sweet i have done all the machining now and will put them back together this weekend and do a full report, im hoping it will all work.
watch this space.
watch this space.
- 4hundread
- Site Supporter
- Reactions:
- Posts: 286
- Joined: Sat Apr 03, 2010 8:03 pm
- Bike owned: 91 GSXR 400
- Location: Dundee
Re: Anyone interested in me doing a write up on my fork internals conversion
Nice one, my projected riding date has been pushed back due to getting run over while crossing the road on Wednesday! Can at least score that one off the bucket list now.Nobbsie wrote:Sweet i have done all the machining now and will put them back together this weekend and do a full report, im hoping it will all work.
watch this space.
Sent from my SM-A510F using Tapatalk
- 4hundread
- Site Supporter
- Reactions:
- Posts: 286
- Joined: Sat Apr 03, 2010 8:03 pm
- Bike owned: 91 GSXR 400
- Location: Dundee
Re: Anyone interested in me doing a write up on my fork internals conversion
Did you get this together? I'm about to take a chance on a cheap set of GSXR 600 K6 fork springs. They are the same dimensions as the 76A ones, might throw in a cheap pair of emulators as well and see how it goes.
Sent from my SM-A510F using Tapatalk
Sent from my SM-A510F using Tapatalk
-
- Settled in member
- Reactions:
- Posts: 85
- Joined: Fri Jun 19, 2015 6:14 am
Re: Anyone interested in me doing a write up on my fork internals conversion
Hey man yea i did, i machined up some andreani cartridges to fit and they work sooooooooo bloody nice i have to say, how are yours coming along.
Its not that hard to make these ones fit if you know someone with a lathe.
Its not that hard to make these ones fit if you know someone with a lathe.