yoshi tmr/mjn Vs fcr33
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Nobbsie
- Settled in member
- Reactions:
- Posts: 85
- Joined: Fri Jun 19, 2015 6:14 am
yoshi tmr/mjn Vs fcr33
Does anyone have real world experiance? I herd that the yoshi tmr/mjn are better for low to mid power, is this true?
Cheers
P.s with them being 32mm you could keep higher intake velocity?!
Cheers
P.s with them being 32mm you could keep higher intake velocity?!
-
Variablevalves suck
- Site Supporter
- Reactions:
- Posts: 2608
- Joined: Sat Jan 24, 2009 10:52 am
- Bike owned: GSXR Carb o'ring kits supplied
- Location: Stoke-on-trent
Re: yoshi tmr/mjn Vs fcr33
Hi,
They are basically the same by different manufacturers so only slight differences.
I have TMR's on my sp and they come with the low speed pump and a choke, im sure FCR have no choke and the pump is an add on, may be wrong.
They come in 28 mm out to 33 mm so lots of choice in diameter.
They are basically the same by different manufacturers so only slight differences.
I have TMR's on my sp and they come with the low speed pump and a choke, im sure FCR have no choke and the pump is an add on, may be wrong.
They come in 28 mm out to 33 mm so lots of choice in diameter.
-
Nobbsie
- Settled in member
- Reactions:
- Posts: 85
- Joined: Fri Jun 19, 2015 6:14 am
Re: yoshi tmr/mjn Vs fcr33
Kool thanks for the info!
Cheers
Nobbsie
Cheers
Nobbsie
-
morris147
- NWAA Supporter
- Reactions:
- Posts: 380
- Joined: Sat Apr 25, 2009 11:08 pm
Re: yoshi tmr/mjn Vs fcr33
i looked at the idea of getting a set of zxr400 carbs spaced out for the 76a, only for the reliability and to see if some sort of ram airbox could be set up.