For all those people wanting rebore/ new liners fitted
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
minkathecat
- Settled in member
- Reactions:
- Posts: 68
- Joined: Mon Jan 05, 2015 6:13 pm
- Bike owned: honda 600rr / z200/honda horne
- Location: manchester LOWTON
For all those people wanting rebore/ new liners fitted
We all know we cant get oversize pistons for gsxr 400 76a
But i and stripes know a guy named terry who has an engineering firm down south and can press your liners out put new liners in and bore and cut away for valves.
You need to send a piston also.
the barels are done using nc machining and should sort a few problems out for people with badly worn barrels with no means of rectifiying them (The cost im afraid is about 579 pounds to have this done But if you are realy stuck i suppose you have to bite the bullet speake to terry you may get it a bit cheaper stripes has done the work and passed it on to me for prices etc and find out if the valves are also machined out in the barrels.
Speak to terry on 01767 318509
But i and stripes know a guy named terry who has an engineering firm down south and can press your liners out put new liners in and bore and cut away for valves.
You need to send a piston also.
the barels are done using nc machining and should sort a few problems out for people with badly worn barrels with no means of rectifiying them (The cost im afraid is about 579 pounds to have this done But if you are realy stuck i suppose you have to bite the bullet speake to terry you may get it a bit cheaper stripes has done the work and passed it on to me for prices etc and find out if the valves are also machined out in the barrels.
Speak to terry on 01767 318509