suzuki coils for gsxr 400 gk76a
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
minkathecat
- Settled in member
- Reactions:
- Posts: 75
- Joined: Mon Jan 05, 2015 6:13 pm
- Bike owned: honda 600rr / z200/honda horne
- Location: manchester LOWTON
suzuki coils for gsxr 400 gk76a
anyone got any ideas for new coils to fit the above bike dont want to pay a lot but may have to bite the bullet for dynotek
regards john
regards john
-
Variablevalves suck
- Site Supporter
- Reactions:
- Posts: 2608
- Joined: Sat Jan 24, 2009 10:52 am
- Bike owned: GSXR Carb o'ring kits supplied
- Location: Stoke-on-trent
Re: suzuki coils for gsxr 400 gk76a
Loads of choices as they are 3 ohm.
If you want dyna's then dc1 green are the one BUT they are massive so check you have plenty of space,
got them for my bandit way back and would not fit.
Other models you can look at are old gsxr, bandit, gs lots of Kawasaki use 3 ohm you just need to be aware of the wire terminals,
some wire the low tension in each side of the ht lead and some go in the other end to the ht, could give you LT wire length problems if you get the wrong type.
If you want dyna's then dc1 green are the one BUT they are massive so check you have plenty of space,
got them for my bandit way back and would not fit.
Other models you can look at are old gsxr, bandit, gs lots of Kawasaki use 3 ohm you just need to be aware of the wire terminals,
some wire the low tension in each side of the ht lead and some go in the other end to the ht, could give you LT wire length problems if you get the wrong type.
-
minkathecat
- Settled in member
- Reactions:
- Posts: 75
- Joined: Mon Jan 05, 2015 6:13 pm
- Bike owned: honda 600rr / z200/honda horne
- Location: manchester LOWTON
Re: suzuki coils for gsxr 400 gk76a
http://www.ebay.co.uk/itm/OEM-SPEC-HITA ... SwhOVXegDY
you mean like this one and not a bad price to 90 crs think this is about right centers place the leads at the top though and use the extension on the wire to connect to existing ?
you mean like this one and not a bad price to 90 crs think this is about right centers place the leads at the top though and use the extension on the wire to connect to existing ?