gk71f

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
bartman400
Settled in member
Reactions:
Posts: 21
Joined: Sat Feb 08, 2014 4:53 pm
Bike owned: gsxr400gk71f
Location: central scotland
gk71f

Post by bartman400 » Fri Dec 04, 2015 8:24 pm

how many people know about the jet sizes on a gk71f? did you guys that a 71f runs bigger jets on no 2 and 3 cylinders to keep them cooler

Evilchicken0
Site Supporter
Site Supporter
Reactions:
Posts: 9490
Joined: Tue Apr 29, 2008 8:59 pm
Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
Location: Lundin Taan
Re: gk71f

Post by Evilchicken0 » Fri Dec 04, 2015 10:52 pm

um .... this is the Yamaha forum ;)

bartman400
Settled in member
Reactions:
Posts: 21
Joined: Sat Feb 08, 2014 4:53 pm
Bike owned: gsxr400gk71f
Location: central scotland
Re: gk71f

Post by bartman400 » Sat Dec 12, 2015 9:57 pm

OOOOPS!

User avatar
jim157
Admin NWAA
Admin NWAA
Reactions:
Posts: 1924
Joined: Mon May 17, 2010 7:15 pm
Bike owned: A few small ones
Location: Norwich
Re: gk71f

Post by jim157 » Sun Dec 13, 2015 8:26 am

Moved to the GSXR section.
AUTOEXEC.TWAT

User avatar
Variablevalves suck
Site Supporter
Site Supporter
Reactions:
Posts: 2608
Joined: Sat Jan 24, 2009 10:52 am
Bike owned: GSXR Carb o'ring kits supplied
Location: Stoke-on-trent
Re: gk71f

Post by Variablevalves suck » Sun Dec 13, 2015 4:18 pm

Check the manual for a definite but they regularly put jets a couple larger in the middle cylinders.

mike151
Settled in member
Reactions:
Posts: 23
Joined: Fri May 09, 2014 6:53 am
Re: gk71f

Post by mike151 » Wed Dec 16, 2015 10:55 pm

Hi Bart, was going to ask about these carbs myself today, you beat me to it ! 1st question, what is the name of these twin carbs, looks like ACSAM ,never heard of them. Took one pair of mine apart today & found 2x 98's mains in one pair & 2x 94's in the other, all four pilots are 34's. Wanted to change some jets butnot the same as mikuni,s. Can jets for this carb be bought ?

bartman400
Settled in member
Reactions:
Posts: 21
Joined: Sat Feb 08, 2014 4:53 pm
Bike owned: gsxr400gk71f
Location: central scotland
Re: gk71f

Post by bartman400 » Thu Dec 17, 2015 8:26 pm

hi mike, the carbs are 4x30mm Aison c.v. ones on this bike. the jet sizes on my bike are ,mains 100/inner,96/outer,,bigger jets for cooling no 2/3 cylinders. as for parts for this bike you could try cms motorcycle parts,very hard to get parts now,o ring seals on jets must be fitted also,refit and balance/tune...hope this helps!!

mike151
Settled in member
Reactions:
Posts: 23
Joined: Fri May 09, 2014 6:53 am
Re: gk71f

Post by mike151 » Thu Dec 17, 2015 11:13 pm

To be honest, these are a spare pair I bought, which I suspect are from a gk71b,slightly different from the ones on my 71f & with slightly smaller jets than yours. Was going to get these ready & put them on my main bike temporary while I check the ones on the bike. What size are your pilots?

bartman400
Settled in member
Reactions:
Posts: 21
Joined: Sat Feb 08, 2014 4:53 pm
Bike owned: gsxr400gk71f
Location: central scotland
Re: gk71f

Post by bartman400 » Fri Dec 18, 2015 7:24 am

pilots are 34, never came across other sizes on these jets? make sure they are clean,tiny holes in there! cheers! you can buy them from cms...

mike151
Settled in member
Reactions:
Posts: 23
Joined: Fri May 09, 2014 6:53 am
Re: gk71f

Post by mike151 » Sat Dec 19, 2015 10:39 am

Hi, interesting to hear about middle cylinders needing bigger jets, I think someone's cocked up & put the bigger ones in the right hand pair on these.gonna get my main set off again & check them ,cos bikes still not quite right, don't think I cleaned needle jets properly,ie didn't take them out.


Post Reply