Bodywork Upgrade??

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
User avatar
Variablevalves suck
Site Supporter
Site Supporter
Reactions:
Posts: 2608
Joined: Sat Jan 24, 2009 10:52 am
Bike owned: GSXR Carb o'ring kits supplied
Location: Stoke-on-trent
Re: Bodywork Upgrade??

Post by Variablevalves suck » Mon Jul 11, 2011 11:01 pm

The NC is narrow due to the V motor, ya inline motors are wider.

stripes1976
Familiar Member
Reactions:
Posts: 415
Joined: Sun Jun 01, 2008 7:14 pm
Bike owned: 6 gk76a's, nc29
Location: 76a mod shop
Re: Bodywork Upgrade??

Post by stripes1976 » Mon Jul 11, 2011 11:26 pm

i seem to remember one of the new yamaha tails fitted to a 76a recently but i cannot find the pictures.
I had an R1 tail on one of my track bikes a while back.

morris147
NWAA Supporter
NWAA Supporter
Reactions:
Posts: 380
Joined: Sat Apr 25, 2009 11:08 pm
Re: Bodywork Upgrade??

Post by morris147 » Tue Jul 12, 2011 12:13 am

I think i have the pic saved on my computer with the r6 end on.


Ill check....

User avatar
Tonyj
Site Supporter
Site Supporter
Reactions:
Posts: 247
Joined: Thu Sep 01, 2011 7:53 pm
Bike owned: FZR400 3EN1 88, YZFR125.GK76a
Location: Northumberland
Re: Bodywork Upgrade??

Post by Tonyj » Sat Feb 18, 2012 5:18 pm

I picked this up on wednesday the rear looks to be a race tail for a k1 600 gixer 2001/2002 i think it suits the bike and updates the look.
Image
Tonyj

User avatar
Deviant400
Site Supporter
Site Supporter
Reactions:
Posts: 1204
Joined: Sat Sep 05, 2009 12:50 pm
Bike owned: NC30, Kona Cowan
Location: Trowbridge
Re: Bodywork Upgrade??

Post by Deviant400 » Sat Feb 18, 2012 5:32 pm

my mates rg500 with rgv250 bodywork
Image
Image
Image
xivlia wrote:no i am not dead. ive just been trying a few things....
Deviants AM/PM build
viewtopic.php?f=62&t=27307

Marsbar
Familiar Member
Reactions:
Posts: 287
Joined: Thu Sep 08, 2011 5:27 pm
Re: Bodywork Upgrade??

Post by Marsbar » Sat Feb 18, 2012 6:07 pm

Tonyj wrote: Image
Tonyj
Just had a closer look at that and its not a very good fit really, shows to much subframe and it dosnt cover the tank. just a bit to small.

User avatar
Tonyj
Site Supporter
Site Supporter
Reactions:
Posts: 247
Joined: Thu Sep 01, 2011 7:53 pm
Bike owned: FZR400 3EN1 88, YZFR125.GK76a
Location: Northumberland
Re: Bodywork Upgrade??

Post by Tonyj » Sat Feb 18, 2012 8:37 pm

Yeh i agree, im gonna strip it back and see if the subframe can be shortened or modified to sit better against the tank, if not then new rear required. Not really had time to do anything with the bike yet since I got it, theres plenty to do after I remove the plastics etc, you know how it is.. ;)

btw that rgv is sweeet, always loved those colours!! Nice.


Post Reply