gk76a rev counter not working..

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
tzrdan
Settled in member
Reactions:
Posts: 25
Joined: Tue Jul 04, 2017 11:49 pm
gk76a rev counter not working..

Post by tzrdan » Wed Jul 05, 2017 12:11 am

Having some trouble with the rev counter on my gk76 not working, tried a second gauge, no joy there..wiring all seems ok too?? Anyone have any ideas or experienced similar issues?

moforockband
Familiar Member
Reactions:
Posts: 388
Joined: Wed Jun 03, 2015 9:41 am
Bike owned: GK73a SP CRM250 mk3
Re: gk76a rev counter not working..

Post by moforockband » Thu Jul 06, 2017 9:43 am

You've definitely checked the wiring splice that goes to the - coil connection??
Odds on it's a bad connection, hence no signal to gauge.

rgvsp
Settled in member
Reactions:
Posts: 244
Joined: Thu May 27, 2010 5:44 pm
Bike owned: RGV250SP (VJ23) GSX-R400R
Location: Atlanta, GA USA
Contact:
Re: gk76a rev counter not working..

Post by rgvsp » Fri Jul 07, 2017 2:26 pm

It actually had the same issue and had to open up the wiring harness and found a split.

tzrdan
Settled in member
Reactions:
Posts: 25
Joined: Tue Jul 04, 2017 11:49 pm
Re: gk76a rev counter not working..

Post by tzrdan » Mon Jul 10, 2017 4:25 pm

Did a quick continuity check on the wiring last week and all checked out ok but going to strip the loom back this evening and see if I can find anything

moforockband
Familiar Member
Reactions:
Posts: 388
Joined: Wed Jun 03, 2015 9:41 am
Bike owned: GK73a SP CRM250 mk3
Re: gk76a rev counter not working..

Post by moforockband » Tue Jul 11, 2017 10:02 am

I think the spilce to check will be very near the coils. Good luck man!


Post Reply