Camshaft for ZZR400

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
RoofRider
Settled in member
Reactions:
Posts: 3
Joined: Mon Aug 24, 2009 8:54 pm
Camshaft for ZZR400

Post by RoofRider » Tue Oct 06, 2009 6:17 pm

any idea where I can get new camshaft for zzr400? or maybe the one from zzr600 will fit?

dynomutt
Settled in member
Reactions:
Posts: 10
Joined: Sat Mar 06, 2010 12:51 pm
Re: Camshaft for ZZR400

Post by dynomutt » Fri Jun 11, 2010 11:28 am

The spacings for the inlet cam are slightly wider on the 600, but cams can be used. I run a modified set of ZZR600D cams in my ZRX400/650 hybrid, same durations just more lift. Which cam are you needing? I've got a spare set of ZRX400 cams here which will fit, these are the same as ZZR600D model timing figures, the 600E had much longer durations, and would need the inlet modifying to fit the 400.


Post Reply

Return to “ZZR - Workshop”