ZZR 400 Engine parts

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
graan
Settled in member
Reactions:
Posts: 3
Joined: Wed Jun 13, 2012 12:39 pm
ZZR 400 Engine parts

Post by graan » Thu Jun 14, 2012 10:06 am

Hi my name is Tienie van Graan and i live in South Africa.

I need new piston rings and big end bearings for my ZZR 400 K. In South Africa the parts is very expensive . Is the parts cheaper somewere els and what will the cost be. I would appreciate a web site to go to for my parts. My engine number is ZX400KE000232 and chassis number is ZX400K-000229. I also noticed that my engine have flat pistons and other models have piston with valve pockets why the difference.

KennonNC29
Settled in member
Reactions:
Posts: 115
Joined: Tue Feb 21, 2012 1:39 pm
Bike owned: NC30
Location: Oxford, Peterborough, new territories Hong Kong
Re: ZZR 400 Engine parts

Post by KennonNC29 » Mon Aug 13, 2012 10:34 pm

hi i know this is a late reply but have you looked at japanwebike perhaps? big ends might be abit hard to get but they normally have pistons available. im not the most educated on the kawasaki 400's but would the zzr engine be a detuned version of the ZXR 400?

i hope this helps abit Kennon

User avatar
CRM
Admin NWAA
Admin NWAA
Reactions:
Posts: 2971
Joined: Sat Apr 05, 2008 2:06 pm
Location: NorthWest
Contact:
Re: ZZR 400 Engine parts

Post by CRM » Wed Aug 15, 2012 7:51 am

KennonNC29 wrote:hi i know this is a late reply but have you looked at japanwebike perhaps? big ends might be abit hard to get but they normally have pistons available. im not the most educated on the kawasaki 400's but would the zzr engine be a detuned version of the ZXR 400?

i hope this helps abit Kennon
no its not, its a sleeved down ZZR600
Insert Signature Here

graan
Settled in member
Reactions:
Posts: 3
Joined: Wed Jun 13, 2012 12:39 pm
Re: ZZR 400 Engine parts

Post by graan » Wed Aug 29, 2012 3:32 pm

Hi. Thanks for the reply, but i already found parts from the local Kawasaki dealer but i had to pay the PRICE.
Why do i get a better top speed in 5 gear than in 6 gear.

User avatar
CRM
Admin NWAA
Admin NWAA
Reactions:
Posts: 2971
Joined: Sat Apr 05, 2008 2:06 pm
Location: NorthWest
Contact:
Re: ZZR 400 Engine parts

Post by CRM » Wed Aug 29, 2012 3:35 pm

gearing, not enough power to pull top gear
go up 2 teeth on the rear sprocket or down one at the front (bit extreme that)
Insert Signature Here

graan
Settled in member
Reactions:
Posts: 3
Joined: Wed Jun 13, 2012 12:39 pm
Re: ZZR 400 Engine parts

Post by graan » Thu Aug 30, 2012 2:55 pm

Thanks.
Will try it when changing chain and sprockets, and that should be soon. You see i do a lot of long distance travel here in South Africa with long and open roads and hardly ever traffic police to check your speed. The guys with the big bikes travel sometimes up 300 KMH where the road permits it. I travel the max what my bike will give me and that could be up to 210 KMH and i keep it there. What a fantastic high reving motor.
Cheers.


Post Reply