Zxr400 Valve adjustment

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
Feisty92
Settled in member
Reactions:
Posts: 3
Joined: Wed Oct 22, 2014 7:47 am
Zxr400 Valve adjustment

Post by Feisty92 » Wed Oct 22, 2014 7:58 am

Hey guys Ive just joined so be nice
Ive recently bought a zxr400 with 30,000kms so i decided to check the valve clearance to be safe and these are the numbers I got
1 2 3 4
EX 0.24 0.25 0.18 0.18 0.24 0.18 0.20 0.18
IN 0.18 0.13 0.14 0.13 0.15 0.13 0.12 0.13

I know the tolerance is EX 0.16-0.21 and IN 0.12-0.17

Obviously most of them need adjustment but what I dont understand is how the clearance on some of them is larger than spec. My understanding was that the clearance tends to tighten as the valve seat wears or is there more to it that that?

Any help would be appreciated
Cheers
Jonathan

richyrd5
Senior Member
Reactions:
Posts: 1351
Joined: Fri Feb 21, 2014 1:31 pm
Re: Zxr400 Valve adjustment

Post by richyrd5 » Sat Dec 27, 2014 7:22 pm

The shims can wear as well as cam lobes.


Post Reply