Zxr400L yoke and head stock nuts

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
juggernaut
Site Supporter
Site Supporter
Reactions:
Posts: 358
Joined: Sun Sep 21, 2008 3:53 pm
Bike owned: LUKE@YORK on the old site!
Location: Leeds
Zxr400L yoke and head stock nuts

Post by juggernaut » Sun Jan 20, 2013 7:19 pm

Was wondering if you guys could clarify the amount of nuts on the headstock?

I've just done a zx6r b1 h conversion on my 30 and compared to the nc30 set up there doesn't seem to be enough nuts to clamp it all together? Ill take a photo later but under the top yoke there is only one nut and a little spacer/locating nut the yoke goes on that and then there's the big nut on top of the yoke.

Does this sound right, it jut seems to have so fewer nuts than the nc30!!

Cheers in advance :0)


Post Reply