ZXR forks Info Please?
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Reactions:
- Posts: 41
- Joined: Sun Jun 15, 2008 8:45 pm
ZXR forks Info Please?
Ive been offered a front end from a ZXR. Forks, Yokes, Steam, Calipers, etc etc.
I'm wanting to put them on my NC29, Im guessing the forks will fit into a set of RVF yokes (50mm) which fit straight onto the NC29 with little mods.
My problem lies with the wheel/disks.
Does the ZXR have a 20mm front axle like the NC29?
Im guessing I will need to keep the ZXR calipers, Not only are they 4 pot (NC29 are twin pot sliders), They are made for the forks.
But Im wanting an NC29 front wheel.
So the problem is then going to be with the Disks. I suppose NC29 disks will be needed to fit the NC29 wheel, But the calipers arent going to line up with the disks are they?
And even if they did, I cant see the ZXR pads being great for the NC29 disks.
Anyhoo, I'll cross that bridge when I come to It, I need to know if an NC29 wheel will go onto a ZXR axle (20mm).
Ben
I'm wanting to put them on my NC29, Im guessing the forks will fit into a set of RVF yokes (50mm) which fit straight onto the NC29 with little mods.
My problem lies with the wheel/disks.
Does the ZXR have a 20mm front axle like the NC29?
Im guessing I will need to keep the ZXR calipers, Not only are they 4 pot (NC29 are twin pot sliders), They are made for the forks.
But Im wanting an NC29 front wheel.
So the problem is then going to be with the Disks. I suppose NC29 disks will be needed to fit the NC29 wheel, But the calipers arent going to line up with the disks are they?
And even if they did, I cant see the ZXR pads being great for the NC29 disks.
Anyhoo, I'll cross that bridge when I come to It, I need to know if an NC29 wheel will go onto a ZXR axle (20mm).
Ben