Rear Suspension linkage
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
torpytanktop
- Settled in member
- Reactions:
- Posts: 10
- Joined: Sat May 24, 2008 8:00 am
Rear Suspension linkage
I have just taken the rear shock off my 1WG and checked the linkage for wear - there is quite a lot of movement where it fixes to the frame. I took it off and found there are two "top hats" either side of the roller. It all seems quite sloppy to me. Should I replace it, or is it normal to have some play?
-
Taggyd
- Site Supporter
- Reactions:
- Posts: 1015
- Joined: Thu May 15, 2008 2:03 pm
- Bike owned: fzr 400 3tj x 2, cbr900rrs
- Location: Ironbridge, uk
Re: Rear Suspension linkage
is the play side to side, cos if it is, i recon it could be a problem!up and down in the vertical would probably be less of a problem as you're weight would keep it locked unless you lifted the rear end. Our 3en1 racer didnt have top hats, it fitted exactly between the mounts that the bolt went through, maybe you have a different shock adapted to fit it?