FZR400RRSP Flat-Slide Carb Settings
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Reactions:
- Posts: 24
- Joined: Sun May 31, 2009 8:44 pm
- Bike owned: FZR400RR (3TJ)
FZR400RRSP Flat-Slide Carb Settings
So, I have an FZR400RR (3TJ-1) with a standard motor in need of carb service. I also have a set of 32mm Keihin FCR flat-slides taken from an FZR600. I thought that I might as well give the flat-slides a go on the FZR400RR since it is headed for the track. Does anyone know the Yamaha factory settings for the RRSP flat-slide carbs?
-
- Site Supporter
- Reactions:
- Posts: 9490
- Joined: Tue Apr 29, 2008 8:59 pm
- Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
- Location: Lundin Taan
Re: FZR400RRSP Flat-Slide Carb Settings
I have a setup manual for a 3tj SP but it's for the CV carbs I think you're going to have to dyno it ... you could ask BDK Racing.
If your taking it on track with flatslides you're probably going to want the BDK airbox / tray mod as well then tune it all
If your taking it on track with flatslides you're probably going to want the BDK airbox / tray mod as well then tune it all