Page 2 of 3

Re: Radiators and 17" Rear Wheels for my 1WG

Posted: Sun Jun 17, 2018 8:47 am
by tehd3thst4r
Splendid!
Do you know if I'll have to use the 400 fan or will the 600 fan fit? I also assume that the 600 hoses will work without too much hassle.

Re: Radiators and 17" Rear Wheels for my 1WG

Posted: Sun Jun 17, 2018 12:56 pm
by BlueR32
The 400 fan won't mount to the 600 radiator. Check out pics of the 600 fan and you will see why.

Re: Radiators and 17" Rear Wheels for my 1WG

Posted: Thu Jul 05, 2018 4:21 am
by tehd3thst4r
While looking for a thundercat front end; I saw something about swapping a 91-94 FZR1000 USD front end onto the 400.
Anyone have experience with that swap?

Re: Radiators and 17" Rear Wheels for my 1WG

Posted: Thu Jul 05, 2018 5:39 pm
by Evilchicken0
The FZR1000RU front end will go in but the front wheel doesn't have a mechanical speedo, the brake discs are 320mm which is a bit big.

Re: Radiators and 17" Rear Wheels for my 1WG

Posted: Thu Jul 05, 2018 5:59 pm
by tehd3thst4r
No mechanical speedo? Well that answers that question.
I'm also strongly considering the R6 swap because I don't like the top clamp from the T-Cat... the recesses for the clipons look super ugly when the bars are underneath. Was the problem with the R6 front just the alignment of the lock?

Re: Radiators and 17" Rear Wheels for my 1WG

Posted: Fri Jul 06, 2018 1:36 pm
by Evilchicken0
Why not use a 1989 3en2 top yoke - it's flat with the clip-ons underneath and 41mm forks, same as the T'Cat

Re: Radiators and 17" Rear Wheels for my 1WG

Posted: Fri Jul 06, 2018 1:38 pm
by Evilchicken0

Re: Radiators and 17" Rear Wheels for my 1WG

Posted: Fri Jul 06, 2018 6:14 pm
by tehd3thst4r
This will pair with the T-Cat bottom yoke?
This would probably be the smartest and cheapest option.

Re: Radiators and 17" Rear Wheels for my 1WG

Posted: Sun Jul 08, 2018 8:19 pm
by Evilchicken0
Should do ... theyre both 41mm dia forks

Re: Radiators and 17" Rear Wheels for my 1WG

Posted: Sun Jul 08, 2018 8:48 pm
by tehd3thst4r
Yeah, but I'm worried that the spacing might be different.