FZR 400RRSP Carbs.
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Reactions:
- Posts: 123
- Joined: Sun Nov 08, 2015 9:23 am
FZR 400RRSP Carbs.
Hello me again, Got my RRSP running yesterday ( first time in approx. 5 years as it had sat in the previous owners damp shed.) I've cleaned the carbs , all jets etc. and it finally ran on choke but will cut out if you use any revs or take it off choke. Must be a blockage somewhere . It has 32mm mukunis fitted. Any advice would be appreciated. Cheers.
-
- Site Supporter
- Reactions:
- Posts: 9490
- Joined: Tue Apr 29, 2008 8:59 pm
- Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
- Location: Lundin Taan
Re: FZR 400RRSP Carbs.
Renewed the fuel filter ?
There's a gauze filter on top of the fuel tap and another in the brown fuel connector where the fuel hose joins the carbs.
Try running it on a remote tank if you have one other wise it's a dirty jet
There's a gauze filter on top of the fuel tap and another in the brown fuel connector where the fuel hose joins the carbs.
Try running it on a remote tank if you have one other wise it's a dirty jet
-
- Settled in member
- Reactions:
- Posts: 123
- Joined: Sun Nov 08, 2015 9:23 am
Re: FZR 400RRSP Carbs.
Thanks again four your advice your Evil Chicken, I'll have another look tomorrow. I had it running again today and got it revving now but not cleanly. I do have a set of really clean 3EN carbs which are very similar. Possibly can try them? Cheers mate.
-
- Site Supporter
- Reactions:
- Posts: 2141
- Joined: Thu Nov 20, 2008 1:09 pm
Re: FZR 400RRSP Carbs.
Sounds like pilot jets or circuit.
-
- Site Supporter
- Reactions:
- Posts: 9490
- Joined: Tue Apr 29, 2008 8:59 pm
- Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
- Location: Lundin Taan
Re: FZR 400RRSP Carbs.
It does sound like a dirty jet.
I've got a similar thing on my Bimota - it's popping on the over run and flames a bit too. It's ok when I add a tiny bit of choke so its probably a dirty jet, strip and clean strip and clean .... I hate this ethanol
I've got a similar thing on my Bimota - it's popping on the over run and flames a bit too. It's ok when I add a tiny bit of choke so its probably a dirty jet, strip and clean strip and clean .... I hate this ethanol
-
- Settled in member
- Reactions:
- Posts: 123
- Joined: Sun Nov 08, 2015 9:23 am
Re: FZR 400RRSP Carbs.
Yeah ethanol is awful.Will strip and clean carbs again.
-
- Settled in member
- Reactions:
- Posts: 13
- Joined: Wed Jan 14, 2015 3:47 am
- Bike owned: 1992 FZR400 RR (3TJ) and more!
- Location: Australia's Capital Territory!
- Contact:
Re: FZR 400RRSP Carbs.
I'm having trouble with mine, might re-test and start a new thread with detailed symptoms.
-
- Settled in member
- Reactions:
- Posts: 123
- Joined: Sun Nov 08, 2015 9:23 am
Re: FZR 400RRSP Carbs.
Hello me again,tried a good working set of carbs tabk and airbox off my other fully working 3tj and still only recs to 4500 max.Sounds like it is hittind a rev limiter.Cant be carbs as same symptons with all my carbs.Firing nicely on all 4 at low revs Getting a bit lost for possobilities now.Any ideas would be appreciated cheers.
Sent from my GT-I9505 using Tapatalk
Sent from my GT-I9505 using Tapatalk
-
- Settled in member
- Reactions:
- Posts: 123
- Joined: Sun Nov 08, 2015 9:23 am
Re: FZR 400RRSP Carbs.
Sorry meant tank.Just a thought, No exup valve or exup motor fitted as running stainless 4 into 1 with standard end can
Should still rev out though even if it lacks some mid range.
Sent from my GT-I9505 using Tapatalk
Should still rev out though even if it lacks some mid range.
Sent from my GT-I9505 using Tapatalk
-
- Settled in member
- Reactions:
- Posts: 123
- Joined: Sun Nov 08, 2015 9:23 am
Re: FZR 400RRSP Carbs.
Tried aend can off mo testriction thete.Also tried anothet CDI.Still only revs to 4500 max.
Sent from my GT-I9505 using Tapatalk
Sent from my GT-I9505 using Tapatalk