3en1 parts mirco fiche
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
dru86
- Settled in member
- Reactions:
- Posts: 32
- Joined: Tue May 27, 2008 11:59 am
- Location: Canberra, Australia
3en1 parts mirco fiche
Anyone got a copy of one or know where one can be found? I've got every other 400 fiche except the one I need.
-
how69
- Settled in member
- Reactions:
- Posts: 8
- Joined: Thu May 15, 2008 5:09 pm
- Location: Belfast
Re: 3en1 parts mirco fiche
HI
I have all the parts books for the fzr400 range.
Is there a part number you need
I have all the parts books for the fzr400 range.
Is there a part number you need
-
dru86
- Settled in member
- Reactions:
- Posts: 32
- Joined: Tue May 27, 2008 11:59 am
- Location: Canberra, Australia
Re: 3en1 parts mirco fiche
Na there's not one particular part that I'm after I'd just like one so I could compare what parts off other models can be interchanged with my 3en1 or visa versa. I'd also like to have have one so I can see what goes on certain brackets or bolts there etc. I don't suppose it's an electronic one that you can sent me though? Where did you get yours, Yamaha dealer?
-
how69
- Settled in member
- Reactions:
- Posts: 8
- Joined: Thu May 15, 2008 5:09 pm
- Location: Belfast
Re: 3en1 parts mirco fiche
sorry this is a parts book.
I got it off japanese yahoo.
I also got service manuals and model revision for most of the range.
They are all in Japanese but you can usually work out sizes or tolerances.
I scanned the 3en2 parts book that is on madsi racing web site.
my scanner has died but hopefully in the near future I can get the lot scanned and hosted somewhere.
I got it off japanese yahoo.
I also got service manuals and model revision for most of the range.
They are all in Japanese but you can usually work out sizes or tolerances.
I scanned the 3en2 parts book that is on madsi racing web site.
my scanner has died but hopefully in the near future I can get the lot scanned and hosted somewhere.
-
dru86
- Settled in member
- Reactions:
- Posts: 32
- Joined: Tue May 27, 2008 11:59 am
- Location: Canberra, Australia
Re: 3en1 parts mirco fiche
Yea I found that 3en2 one on madsi racing pretty easily a while ago thanks for putting it up. Could you let me know if you get around to scanning the 3en1?