Radiators and 17" Rear Wheels for my 1WG

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Evilchicken0
Site Supporter
Site Supporter
Reactions:
Posts: 9419
Joined: Tue Apr 29, 2008 8:59 pm
Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
Location: Lundin Taan
Re: Radiators and 17" Rear Wheels for my 1WG

Post by Evilchicken0 » Sun Jul 08, 2018 10:20 pm

Id say its unlikely.

tehd3thst4r
Settled in member
Reactions:
Posts: 12
Joined: Wed Jun 13, 2018 9:07 am
Re: Radiators and 17" Rear Wheels for my 1WG

Post by tehd3thst4r » Fri Jan 25, 2019 9:19 am

Been gone a while (fell down a Ducati hole) so I figured I'd pop back in and see if I could get some info on the 3TJ swingarm swap into my W1G frame.
I have the fairings off for paint, the bike is partially stripped down to perform another full tuneup, and the tires are looking pretty trashed... what better time to perform some upgrades?
Already finished my radiator swap, and purchased and rebuilt a Tcat front end.

I plan on getting this underway in the near future.

freefallfil
Settled in member
Reactions:
Posts: 50
Joined: Wed Jul 04, 2012 10:58 am
Re: Radiators and 17" Rear Wheels for my 1WG

Post by freefallfil » Sun Jan 27, 2019 10:52 am

Talk to Kayla at projection components re grafting the 3tj rear end into a 1wg, pretty straight forward x2 tophat bushes to step the spindle size down to match the frame pivot point & different length dogbones to return to original ride height-simples!


Sent from my iPhone using Tapatalk


Post Reply