Page 3 of 4

Re: My FZR's

Posted: Tue May 28, 2013 9:33 pm
by Evilchicken0
Its a Leo Vinci ... But try PJ Engineering they reskined mine and sell standard shaped ones too.

Re: My FZR's

Posted: Thu Jun 06, 2013 1:57 pm
by ibby4585
I'm taking the RR to the Cadwell trackday so I'm now going to be doing a bit if work on it to get it ready.

First thing I want to do is swap over the standard RR forks to the SP forks I've got, but first I want to service them.

I've never really done much work on forks so anyone got any tips for taking them apart?

They might have Maxton internals, how do I tell?

Re: My FZR's

Posted: Thu Jun 06, 2013 4:48 pm
by Evilchicken0
Start to undo the fork top with the stanchions in the triple clamps - this is because it's difficult to hold them once off the bike.
There's a bolt in the bottom of the stanchoin that holds the slider into the outer, it secures to a nut that's only reachable through the top of the fork. try a bit of steel box section to hold the nut. There are other ways to it.
My project bike's forks have manxton stickers on them.

When's the track day ?

Re: My FZR's

Posted: Thu Jun 06, 2013 4:54 pm
by ibby4585
Evilchicken0 wrote:Start to undo the fork top with the stanchions in the triple clamps - this is because it's difficult to hold them once off the bike.
There's a bolt in the bottom of the stanchoin that holds the slider into the outer, it secures to a nut that's only reachable through the top of the fork. try a bit of steel box section to hold the nut. There are other ways to it.
My project bike's forks have manxton stickers on them.

When's the track day ?
Cheers I will have a crack at it.

Trackday is 3-4th August

Re: My FZR's

Posted: Fri Jun 14, 2013 5:47 pm
by ibby4585
Gave the 3tj6 a good clean this week and sorted out a few problems for the MOT. I fitted some new white mirrors (should have black but prefer white) And a set of original indicators.

Gave it a good run out today and apart from a knocking noise at the front ( maybe head bearings) it runs perfect.

Image

Image

Image

Re: My FZR's

Posted: Fri Jun 14, 2013 5:55 pm
by Drunkn Munky
I know its pink but after seeing it the flesh i really like that one :up:

Re: My FZR's

Posted: Fri Jun 14, 2013 10:20 pm
by rockTJ
It's the best colour, honestly 8-)

Ibby that looks fookin proper nice. Very jealous of the tail plastics lol :drool:

Chris

Re: My FZR's

Posted: Fri Jun 14, 2013 10:21 pm
by alexwitham
Yes that is very very nice.

Re: My FZR's

Posted: Fri Jun 14, 2013 10:36 pm
by Evilchicken0
Go on then show me how the tail repairs turned out :grin:

It does look proper nice - how's it running with the flatslides ?

Re: My FZR's

Posted: Sat Jun 15, 2013 8:38 am
by ibby4585
Evilchicken0 wrote:Go on then show me how the tail repairs turned out :grin:

It does look proper nice - how's it running with the flatslides ?

This is the 3tj6, the 7 which you repaired is still work in progess! ;-( carbs leaking and perished fuel hoses!!

The 6 is running on cv's at the minute but I have the flatslides and rubbers for it. :-)


I've bought a set of cv's for the 7 so I can bung them on and get it running then sort the flatslides properly.
I'm sure the bike doesn't like me! :-(