ive got a fzr400 that im trying to get a screen for but keep getting the wrong one the top fairing has hoover pipes at the top
and two round lights , ive had a genesis 1wg and a 3en neather fit
help

Hi,
From your description you have a FZR400 3EN1 top fairing (or possibly a FZR600 3HE), you are right the FZR400 1WG Genesis screen won't fit & there is also a FZR400 3EN2 (similar to your's except the air pipes are below thw lights & to the side of the fairing). Sounds like you may have had a screen for this model 3EN2, or possibly an incorrectly listed FZR400 3TJ model (single headlight & no air pipes but later to the 1WG's). All very confusing I know - try using the model identifier to correctly identify your bike (or post a picture) & then take it from there, hope this helps?

Regards,
Phil.

Yup its a FZR400R 3EN1 1988 model. I think Power bronze or skidmrax wiil do them.

Hello mate,

Got mine from here (Got a choice of colours in a drop down menu): http://www.ebay.co.uk/itm/YAMAHA-FZR600 ... 3cd0ac8a2e

Fitted my 1988 FZR400 (3EN1) nicely just needed the holes around the mirror bolting points enlarging very slightly (easy job with a dremel or some sandpaper). I'm sure I got the FZR600 screen in this listing because the FZR 3EN1 has the same cowling as the FZR600 3HE. I can try and find an old receipt and double check for you.

The 600 changed its fairing and screens too, but the 600 fairing fits the 400 so it follows the screens should be similar, as long (as the top fairing marches)

Need a new screen for my 3tj mine cracked near the top and it doesnt fit perfectly

Skidmarx do them