Where to get fairings ?
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Site Supporter
- Reactions:
- Posts: 9490
- Joined: Tue Apr 29, 2008 8:59 pm
- Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
- Location: Lundin Taan
Re: Where to get fairings ?
So is pissing in the wind ... you can make it work if you try hard enoughthunderace wrote:Evilchicken0 wrote:The 3TJ fairings just won't fit - no way no how.
That's just a defeatist attitude Boris
The front fairings can be made to fit but it's a lot of work. He could use a TZ250 race seat unit to replicate the SP rear end.
The 3TJ is shorter at the headstock you'd have to cut and shut it and that would loose the proportion of the fairing.
-
- Settled in member
- Reactions:
- Posts: 7
- Joined: Sat Dec 03, 2011 2:40 pm
Re: Where to get fairings ?
I honestly was not being lasy . i have been searching high and low. the project dosent start for another 3 weeks or so . so i got loads of time .
the reson for wanting to change is because i love the look of the triangle head light . weather its a 600 ,400 or even on the 1000 . its the front end that i want for my bike but NOT theback end lol . as seen here on a 3tj with r6 rear
i know that it will not be a direct fit but wheres the fun in that .
it might be hard to tell in my pictures but my bike has been totaly butchered so even if i get the right fairings they will take just as much work .
i thought mine was a wg1 because it is stamped both on the engine and frame ...
i have managed to find some fairings localy but thay are not cheap in my book . im looking at about 415 USD for top and front sides
the reson for wanting to change is because i love the look of the triangle head light . weather its a 600 ,400 or even on the 1000 . its the front end that i want for my bike but NOT theback end lol . as seen here on a 3tj with r6 rear
i know that it will not be a direct fit but wheres the fun in that .
it might be hard to tell in my pictures but my bike has been totaly butchered so even if i get the right fairings they will take just as much work .
i thought mine was a wg1 because it is stamped both on the engine and frame ...
i have managed to find some fairings localy but thay are not cheap in my book . im looking at about 415 USD for top and front sides
-
- Site Supporter
- Reactions:
- Posts: 9490
- Joined: Tue Apr 29, 2008 8:59 pm
- Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
- Location: Lundin Taan
Re: Where to get fairings ?
http://www.ebay.co.uk/itm/YAMAHA-FZR600 ... 53f493f645
A bit rough but this is from FZR600 3HE, I think this is a 91 92, the good news is this will bolt onto your bike with the standard fairing lowers. I'd fill the air intakes with indicators.
The 3TJ headlight will fit (they're not a very good headlight though.
You'll need to get these - http://www.ebay.co.uk/itm/YAMAHA-FZR600 ... 3ccb7f874c theres a second one on the bay ... unavailable part.
Yes you have a 1WG, all the bikes up to the 3en2 are 1WG then they're 3TJ ... although the 3TJ engine is stamped 1WG
A bit rough but this is from FZR600 3HE, I think this is a 91 92, the good news is this will bolt onto your bike with the standard fairing lowers. I'd fill the air intakes with indicators.
The 3TJ headlight will fit (they're not a very good headlight though.
You'll need to get these - http://www.ebay.co.uk/itm/YAMAHA-FZR600 ... 3ccb7f874c theres a second one on the bay ... unavailable part.
Yes you have a 1WG, all the bikes up to the 3en2 are 1WG then they're 3TJ ... although the 3TJ engine is stamped 1WG
- Kayla850
- NWAA Supporter
- Reactions:
- Posts: 1170
- Joined: Sun Apr 18, 2010 6:30 pm
- Bike owned: Sunn Tzar S2
- Location: County Durham
Re: Where to get fairings ?
I've just ordered some Akai race fairingsKayla850 wrote:They'll do custom paint on the panels they make, so you could have a 3EN1 painted up like a 3TJ SP if you wanted, or a close approximation anyway given the difference in panel shapes.
I'm having some of those Akai fairings for my 3EN2 4/6...
Useful project bike parts and stuff and things-
www.projection-racing.com
Titanium and Aluminium nuts & bolts-
www.pjcfasteners.com
www.projection-racing.com
Titanium and Aluminium nuts & bolts-
www.pjcfasteners.com
-
- Site Supporter
- Reactions:
- Posts: 9490
- Joined: Tue Apr 29, 2008 8:59 pm
- Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
- Location: Lundin Taan
Re: Where to get fairings ?
Win !!!!Kayla850 wrote:I've just ordered some Akai race fairingsKayla850 wrote:They'll do custom paint on the panels they make, so you could have a 3EN1 painted up like a 3TJ SP if you wanted, or a close approximation anyway given the difference in panel shapes.
I'm having some of those Akai fairings for my 3EN2 4/6...
-
- Familiar Member
- Reactions:
- Posts: 318
- Joined: Sat Mar 31, 2012 3:43 pm
- Bike owned: GSX650F FZR250x2 RSV RG80
- Location: Southend-on-Sea
Re: Where to get fairings ?
Would love to hear feedback on this seller Kayla as I will be ordering a set of fairings for my 3LN FZR250 from them later this summer. Just getting all the rest of the bits together to make a decent job of it (which meant getting another one!)
If you get stung for VAT or have probs - or don't! Would appreciate knowing!!!!
Chris
If you get stung for VAT or have probs - or don't! Would appreciate knowing!!!!
Chris
- Kayla850
- NWAA Supporter
- Reactions:
- Posts: 1170
- Joined: Sun Apr 18, 2010 6:30 pm
- Bike owned: Sunn Tzar S2
- Location: County Durham
Re: Where to get fairings ?
No probs. I'll probably get stung for import duty on them, but even after adding £100 or so on it's still a good value set of fairings with a cool paint job for around £400.rockTJ wrote:Would love to hear feedback on this seller Kayla as I will be ordering a set of fairings for my 3LN FZR250 from them later this summer. Just getting all the rest of the bits together to make a decent job of it (which meant getting another one!)
If you get stung for VAT or have probs - or don't! Would appreciate knowing!!!!
Chris
Useful project bike parts and stuff and things-
www.projection-racing.com
Titanium and Aluminium nuts & bolts-
www.pjcfasteners.com
www.projection-racing.com
Titanium and Aluminium nuts & bolts-
www.pjcfasteners.com
-
- Site Supporter
- Reactions:
- Posts: 9490
- Joined: Tue Apr 29, 2008 8:59 pm
- Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
- Location: Lundin Taan
Re: Where to get fairings ?
You might be able to claim some of the tax back as a company
- jim157
- Admin NWAA
- Reactions:
- Posts: 1924
- Joined: Mon May 17, 2010 7:15 pm
- Bike owned: A few small ones
- Location: Norwich
Re: Where to get fairings ?
If the seller hasnt already sent them it might be worth asking him to mark the box as 'sales samples' with a negligible value?
AUTOEXEC.TWAT
- Kayla850
- NWAA Supporter
- Reactions:
- Posts: 1170
- Joined: Sun Apr 18, 2010 6:30 pm
- Bike owned: Sunn Tzar S2
- Location: County Durham
Re: Where to get fairings ?
I can claim the full amount back as a tax deductible expense as the bike is owned by the businessEvilchicken0 wrote:You might be able to claim some of the tax back as a company
Useful project bike parts and stuff and things-
www.projection-racing.com
Titanium and Aluminium nuts & bolts-
www.pjcfasteners.com
www.projection-racing.com
Titanium and Aluminium nuts & bolts-
www.pjcfasteners.com