R6 /R1 body kit
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Site Supporter
- Reactions:
- Posts: 722
- Joined: Thu May 15, 2008 2:03 pm
- Bike owned: fzr 400 3tj x 2, cbr900rrs
- Location: Ironbridge, uk
Re: R6 /R1 body kit
thanks evil i had looked at that but they have an open bottom dont they? i dont want to have to fibreglass it in if i can help it and i know the r6 race belly fits the 3tj with a few small brackets, then i can at least run it naked until i get a fairing suitable as funds are a bit tight at the minute!i have all parts now except the fairing and headers!
taggy
taggy
- Motorcycle Solutions
- Site Supporter
- Reactions:
- Posts: 239
- Joined: Wed Apr 30, 2008 9:05 pm
- Bike owned: Kawasaki ZX9R E1
- Location: Warwickshire
- Contact:
Re: R6 /R1 body kit
Taggy i will email fischer rep and ask for the top of the r6 fairing for you... hows that for xmas pressy...
-
- Settled in member
- Reactions:
- Posts: 76
- Joined: Wed Dec 17, 2008 7:22 pm
Re: R6 /R1 body kit
the whole body fits a 3en2 if you lift the tail a bit and chop off the metal you dont need
-
- Site Supporter
- Reactions:
- Posts: 722
- Joined: Thu May 15, 2008 2:03 pm
- Bike owned: fzr 400 3tj x 2, cbr900rrs
- Location: Ironbridge, uk
Re: R6 /R1 body kit
yep i know i can do the whole thing but was looking for cheaper option as its for a wet bike so full fairing not really needed, just need to comply with oil catch which the r6 race belly has!
taggy
taggy
-
- Settled in member
- Reactions:
- Posts: 76
- Joined: Wed Dec 17, 2008 7:22 pm
Re: R6 /R1 body kit
i paid just over a hundred pounds for a complete r6 body off flea bay its not the greatest but its ok
-
- Settled in member
- Reactions:
- Posts: 2
- Joined: Fri Jul 22, 2011 4:23 pm
Re: R6 /R1 body kit
Hello, Spannerman,
I'm wanting to do similar to what you did,but i would like to fit R1 99-00' TAIL UNIT.
What did you have to do to fit R6 seat unit?
Was it a right pig to do, what about th subframe,any cutting/welding?
Need help,
Regards.......
I'm wanting to do similar to what you did,but i would like to fit R1 99-00' TAIL UNIT.
What did you have to do to fit R6 seat unit?
Was it a right pig to do, what about th subframe,any cutting/welding?
Need help,
Regards.......
Re: R6 /R1 body kit
My 3TJ/Cat hybrid runs an 03-05 R6 faring and seat unit
Not the best paint job but its built for the track, not a beauty contest! Fairing fits with a few mods to brackets and holes for engine covers opened out a bit. Seat unit was more of a challange but i have used the standard subframe cut down.
Got more pictures if you need some
Not the best paint job but its built for the track, not a beauty contest! Fairing fits with a few mods to brackets and holes for engine covers opened out a bit. Seat unit was more of a challange but i have used the standard subframe cut down.
Got more pictures if you need some