Fairing fit 3EN1/3EN2
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Reactions:
- Posts: 12
- Joined: Fri Aug 03, 2018 8:36 am
- Bike owned: 1988 FZR400
- Location: Australia
Fairing fit 3EN1/3EN2
Hi, first post. I have a 1988 3 EN1, which I bought for $200 but now owes me 4.5k . It is finished excepting some paint. I’m struggling to find even Chinese fairings to suit. I really only need left and right front side panels/underbelly. I can buy chinese 3EN2 fairings. I understand the air hose inlet positioning is different on the nose cone, but otherwise are the fairings the same?
-
- Site Supporter
- Reactions:
- Posts: 9490
- Joined: Tue Apr 29, 2008 8:59 pm
- Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
- Location: Lundin Taan
Re: Fairing fit 3EN1/3EN2
Wotcha
The 3en2 fairing lowers and the fzr600 3he ( the one piece lowers) both fit - which is nice. If you buy oe yam fairings check they still have the section low + rear that joins together under the shock / swingarm. Its fragile and gets broken
The 3en2 fairing lowers and the fzr600 3he ( the one piece lowers) both fit - which is nice. If you buy oe yam fairings check they still have the section low + rear that joins together under the shock / swingarm. Its fragile and gets broken
-
- Settled in member
- Reactions:
- Posts: 12
- Joined: Fri Aug 03, 2018 8:36 am
- Bike owned: 1988 FZR400
- Location: Australia
Re: Fairing fit 3EN1/3EN2
Thanks Evil. My bike came without the side front lowers. I have Chinese ones with stock graphics but they are white and don’t match the stock white pearl. I want the bike to look stock so might buy another whole EN2 kit raw just to get the lowers . There seem to be very few EN FZR400s in Aus and OEM bits are impossible to find.
-
- Site Supporter
- Reactions:
- Posts: 9490
- Joined: Tue Apr 29, 2008 8:59 pm
- Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
- Location: Lundin Taan
Re: Fairing fit 3EN1/3EN2
Theyre getting to the age where theyre beyond repair. The fairings get brittle bits get lost - like the seat joiner and the inner fairings