What goes here?

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
redbandit12
Settled in member
Reactions:
Posts: 81
Joined: Sat Jul 19, 2014 8:19 pm
Bike owned: FZR400 3EN2
Location: Southport
What goes here?

Post by redbandit12 » Sun Dec 21, 2014 8:51 am

Can anybody tell me what bolts here please (3EN2)

Image

Evilchicken0
Site Supporter
Site Supporter
Reactions:
Posts: 9490
Joined: Tue Apr 29, 2008 8:59 pm
Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
Location: Lundin Taan
Re: What goes here?

Post by Evilchicken0 » Sun Dec 21, 2014 10:08 am

That's where the tank cover bolts to the tank below. Look on the (black) fuel tank and you'll see a captive nut. It gets covered by the saddle.

redbandit12
Settled in member
Reactions:
Posts: 81
Joined: Sat Jul 19, 2014 8:19 pm
Bike owned: FZR400 3EN2
Location: Southport
Re: What goes here?

Post by redbandit12 » Mon Dec 22, 2014 7:52 pm

Thanks. Also, are the two rectangular grommets for side panel location still available. If not, is there anything else that can be used??

willandrip
Site Supporter
Site Supporter
Reactions:
Posts: 1223
Joined: Sun Aug 14, 2011 8:33 am
Bike owned: Far, far too many now
Location: North Tyneside Tyne and Wear
Re: What goes here?

Post by willandrip » Mon Dec 22, 2014 8:12 pm

The original grommets are 90480-01401 and fit quite a few models even if somewhat expensive.
http://www.ebay.co.uk/itm/Yamaha-RD125L ... 1241369940

I am sure I have used these on a refurb though;
http://www.ebay.co.uk/itm/YAMAHA-FZ600- ... 51c8c43eb0

There is a parts fiche here;
http://www.400greybike.com/docs.htm
A red box doth not a Snap On make.

redbandit12
Settled in member
Reactions:
Posts: 81
Joined: Sat Jul 19, 2014 8:19 pm
Bike owned: FZR400 3EN2
Location: Southport
Re: What goes here?

Post by redbandit12 » Mon Dec 22, 2014 10:14 pm

Sorry, I worded the question wrong. I meant the two rectangular grommets on the sides of the tank cover that locate the front of the side panels. P/N 90480-01514. Is there anything that can be used if they are unavailable.
Cheers

Evilchicken0
Site Supporter
Site Supporter
Reactions:
Posts: 9490
Joined: Tue Apr 29, 2008 8:59 pm
Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
Location: Lundin Taan
Re: What goes here?

Post by Evilchicken0 » Mon Dec 22, 2014 11:23 pm

You can try so panel trim or just a round grommet of the right size.
The side panels have a hook at the front that fits into the hole


Post Reply