NC31/NC42 OEM oversized pistons/rings
Posted: Wed Nov 28, 2018 9:52 am
I need oversized pistons for the project engine NC42 or NC31. The differ in compression height but in my case it doesn't matter.
I don't want to use chinese pistons "AHL" as I don't trust it and didn't find any reports about the use. Especially fir rings.
I know there should be original pistons and rings but can't find the part numbers.
13101-MCE-000 <- piston
13011-MCE-305 <- rings
So it should be
13102-MCE-000 <- piston + 0,25
13021-MCE-305 <- rings + 0,25
Am I right? Or do some 55-58mm pistons with 14mm pin exist for 12000 RPM engines exist? FZR400 pistons are OK but 15mm pin makes it hard to use, no way to change the conrod
I don't want to use chinese pistons "AHL" as I don't trust it and didn't find any reports about the use. Especially fir rings.
I know there should be original pistons and rings but can't find the part numbers.
13101-MCE-000 <- piston
13011-MCE-305 <- rings
So it should be
13102-MCE-000 <- piston + 0,25
13021-MCE-305 <- rings + 0,25
Am I right? Or do some 55-58mm pistons with 14mm pin exist for 12000 RPM engines exist? FZR400 pistons are OK but 15mm pin makes it hard to use, no way to change the conrod