NC23E engine in NC31
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- One Hit Wonder
- Reactions:
- Posts: 1
- Joined: Thu Nov 04, 2010 3:19 pm
Re: NC23E engine in NC31
hi everyone
i'm from Russia, and i want to say, that manual had some mistakes. be careful
i'm from Russia, and i want to say, that manual had some mistakes. be careful
-
- Settled in member
- Reactions:
- Posts: 18
- Joined: Sat Sep 05, 2009 12:25 pm
Re: NC23E engine in NC31
Sorry my 6th gear jumps!!! can I put this http://www.ebay.co.uk/itm/HONDA-CB1-CB4 ... SwKtlWjWMz into my bike nc31 L reg ?
-
- Settled in member
- Reactions:
- Posts: 39
- Joined: Tue Oct 11, 2016 9:37 am
- Bike owned: CB400SF NC39, '88 NC23 tri-arm
- Location: West Midlands
Re: NC23E engine in NC31
Digitaly, could you be more specific with the gear issue?
I have the vtec spec 2 and I have a gearbox issue similar, 6th gear jumping... I am planning to have it repaired instead of replaced as vtec 2 engines aren't that common second hand
Sent from my E6653 using Tapatalk
I have the vtec spec 2 and I have a gearbox issue similar, 6th gear jumping... I am planning to have it repaired instead of replaced as vtec 2 engines aren't that common second hand
Sent from my E6653 using Tapatalk
-
- Settled in member
- Reactions:
- Posts: 34
- Joined: Wed Sep 28, 2016 6:05 pm
- Bike owned: NC31
- Location: Russia, Moscow
- Contact:
Re: NC23E engine in NC31
NC31 is more thin than NC23E about 20mm. Because of different cam gear drive mechanism. I thought about swapping but now tuning NC31 engine - it's easier. Also it has different mount angle. The frame will have to be rewelded