Page 17 of 19

Re: Show us your bike...

Posted: Sat Mar 11, 2017 5:14 pm
by FTM
Not mine but the wife's.
Image

Re: Show us your bike...

Posted: Tue Nov 14, 2017 7:32 am
by Tmane90
Beautiful job, I’m going for kind of the same look. What clip-ons did you use and how does it ride overall now?
jackup wrote:Hears my superfour just got it on the road made it into a little cafe racer got the bike for £700 replaced front calipers and pads all round ,clipons shorted throttle cables and cut and welded the frame for single seat ,put some graphics on and line tape total cost £900
Image
Image
Image

Sent from my iPhone using Tapatalk

Re: Show us your bike...

Posted: Mon Nov 12, 2018 4:48 pm
by pugnator
My beloved 1993 production year NC31 became some kind of a "project" for me last year.
I've teared it down to a single bolt.
Image

First things first. So I completely repainted the frame, rims, forks etc - sanding plus powder coating

Image
Image

The front rim - original 3" NC31, the rear one - 5" NC42 for ABS rotor ;)
The front rim was also slightly modified for installation of front ABS rotor.
NC42 swingarm was also installed - it took some time to machine some parts, it won't fit by itself.

Fuel tank, fenders was painted in Kandy Apple Red

Image

Side covers were made from scratch with carbon fiber.

Image

The seat was altered and gel-pad was added

Image

Engine was fitted with tunable EFI on original NC42 throttle bodies. CBR1000RR COPs etc
Image

The work is in progress at the moment

Image

And some items for next year

Image

Re: Show us your bike...

Posted: Fri Jan 11, 2019 10:44 pm
by theEK1
pugnator wrote:
Mon Nov 12, 2018 4:48 pm
My beloved 1993 production year NC31 became some kind of a "project" for me last year.
I've teared it down to a single bolt.
[img]

First things first. So I completely repainted the frame, rims, forks etc - sanding plus powder coating

[img]

The front rim - original 3" NC31, the rear one - 5" NC42 for ABS rotor ;)
The front rim was also slightly modified for installation of front ABS rotor.
NC42 swingarm was also installed - it took some time to machine some parts, it won't fit by itself.

Fuel tank, fenders was painted in Kandy Apple Red

[img]

Side covers were made from scratch with carbon fiber.

[img]

The seat was altered and gel-pad was added

[img]

Engine was fitted with tunable EFI on original NC42 throttle bodies. CBR1000RR COPs etc
[img]

The work is in progress at the moment

[img]

And some items for next year

[img]
Amazing work and total dedication to this little underrated bike. I think, although the movement on this forum is quite slow, it would be awesome if you took some time and did a new topic about it on here, in English, so it would come up on g00gle when searching :roll: . I read everything on drive2 and 400ccm.ru. Hopefully will do some more work on my SF, and shall be able to share progress of it here. Keep up the good work :popcorn:

Re: Show us your bike...

Posted: Tue Jan 15, 2019 1:55 pm
by pugnator
theEK1 wrote:
Fri Jan 11, 2019 10:44 pm
Amazing work and total dedication to this little underrated bike. I think, although the movement on this forum is quite slow, it would be awesome if you took some time and did a new topic about it on here, in English, so it would come up on g00gle when searching :roll: . I read everything on drive2 and 400ccm.ru. Hopefully will do some more work on my SF, and shall be able to share progress of it here. Keep up the good work :popcorn:
I'm working on good description in english, I have one in russian though. In spite of the fact I write a lot in english at work, I make a lot of stupid mistakes when it comes to something personal. I hope I finish it soon.

Re: Show us your bike...

Posted: Sat May 04, 2019 4:40 am
by Indosuperfour
Image

Hello from Indonesia..
CB400SF VTEC-II ‘03
Original paint with Moriwaki Zero Ti FS exhaust

TIA..
Image


Sent from my iPhone using Tapatalk

Re: Show us your bike...

Posted: Sat May 04, 2019 4:44 am
by Indosuperfour
pugnator wrote:
Mon Nov 12, 2018 4:48 pm
My beloved 1993 production year NC31 became some kind of a "project" for me last year.
I've teared it down to a single bolt.
[img]https://a.d-cd.net/5c01525s-960.jpg
First things first. So I completely repainted the frame, rims, forks etc - sanding plus powder coating
[img]https://a.d-cd.net/6MAAAgGbKOA-960.jpg
[img]https://a.d-cd.net/48AAAgGbKOA-960.jpg
The front rim - original 3" NC31, the rear one - 5" NC42 for ABS rotor ;)
The front rim was also slightly modified for installation of front ABS rotor.
NC42 swingarm was also installed - it took some time to machine some parts, it won't fit by itself.
Fuel tank, fenders was painted in Kandy Apple Red
[img]https://a.d-cd.net/zwAAAgIX0OA-960.jpg
Side covers were made from scratch with carbon fiber.
[img]https://a.d-cd.net/agAAAgHUFOA-960.jpg
The seat was altered and gel-pad was added
[img]https://a.d-cd.net/zYAAAgEkVOA-960.jpg
Engine was fitted with tunable EFI on original NC42 throttle bodies. CBR1000RR COPs etc
[img]https://a.d-cd.net/9fa54f5s-960.jpg
The work is in progress at the moment
[img]https://a.d-cd.net/jYAAAgEkVOA-960.jpg
And some items for next year
[img]https://a.d-cd.net/GAAAAgJVOOA-960.jpg
such a big job at down there..
LOL, however.. Cool mods buddy!

Re: Show us your bike...

Posted: Mon Jun 24, 2019 9:52 pm
by Graham04
Image

I use this for regular VMCC runs. 27 years old so eligible for the majority of their events. It has won a centre stand since this picture. Graham

Re: Show us your bike...

Posted: Sat Feb 15, 2020 7:58 pm
by ligurt
Honda vf400f tsukuba D.o.b.a.r. tribute. Work in progress
Image
Image

Re: Show us your bike...

Posted: Sun Feb 23, 2020 9:02 pm
by ArizonaRVF
1994 RVF400RR. Frame off restoration in early 2019.

Image

Currently in pieces, engine is with Mike Norman for the full 428cc engine build....after the original bottom end ate itself on the first ride, immediately after getting it all back together.... :whistle:

Image

Image

Image