Show us your bike...

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
FTM
Settled in member
Reactions:
Posts: 24
Joined: Fri Oct 17, 2008 8:52 pm
Bike owned: TUONO AERO CB400 VFR750
Location: Portsmouth
Re: Show us your bike...

Post by FTM » Sat Mar 11, 2017 5:14 pm

Not mine but the wife's.
Image

Tmane90
Settled in member
Reactions:
Posts: 4
Joined: Mon Nov 13, 2017 7:28 am
Re: Show us your bike...

Post by Tmane90 » Tue Nov 14, 2017 7:32 am

Beautiful job, I’m going for kind of the same look. What clip-ons did you use and how does it ride overall now?
jackup wrote:Hears my superfour just got it on the road made it into a little cafe racer got the bike for £700 replaced front calipers and pads all round ,clipons shorted throttle cables and cut and welded the frame for single seat ,put some graphics on and line tape total cost £900
Image
Image
Image

Sent from my iPhone using Tapatalk

pugnator
Settled in member
Reactions:
Posts: 25
Joined: Wed Sep 28, 2016 6:05 pm
Bike owned: NC31
Location: Russia, Moscow
Contact:
Re: Show us your bike...

Post by pugnator » Mon Nov 12, 2018 4:48 pm

My beloved 1993 production year NC31 became some kind of a "project" for me last year.
I've teared it down to a single bolt.
Image

First things first. So I completely repainted the frame, rims, forks etc - sanding plus powder coating

Image
Image

The front rim - original 3" NC31, the rear one - 5" NC42 for ABS rotor ;)
The front rim was also slightly modified for installation of front ABS rotor.
NC42 swingarm was also installed - it took some time to machine some parts, it won't fit by itself.

Fuel tank, fenders was painted in Kandy Apple Red

Image

Side covers were made from scratch with carbon fiber.

Image

The seat was altered and gel-pad was added

Image

Engine was fitted with tunable EFI on original NC42 throttle bodies. CBR1000RR COPs etc
Image

The work is in progress at the moment

Image

And some items for next year

Image

theEK1
Settled in member
Reactions:
Posts: 6
Joined: Sat Jan 06, 2018 10:44 pm
Re: Show us your bike...

Post by theEK1 » Fri Jan 11, 2019 10:44 pm

pugnator wrote:
Mon Nov 12, 2018 4:48 pm
My beloved 1993 production year NC31 became some kind of a "project" for me last year.
I've teared it down to a single bolt.
[img]

First things first. So I completely repainted the frame, rims, forks etc - sanding plus powder coating

[img]

The front rim - original 3" NC31, the rear one - 5" NC42 for ABS rotor ;)
The front rim was also slightly modified for installation of front ABS rotor.
NC42 swingarm was also installed - it took some time to machine some parts, it won't fit by itself.

Fuel tank, fenders was painted in Kandy Apple Red

[img]

Side covers were made from scratch with carbon fiber.

[img]

The seat was altered and gel-pad was added

[img]

Engine was fitted with tunable EFI on original NC42 throttle bodies. CBR1000RR COPs etc
[img]

The work is in progress at the moment

[img]

And some items for next year

[img]
Amazing work and total dedication to this little underrated bike. I think, although the movement on this forum is quite slow, it would be awesome if you took some time and did a new topic about it on here, in English, so it would come up on g00gle when searching :roll: . I read everything on drive2 and 400ccm.ru. Hopefully will do some more work on my SF, and shall be able to share progress of it here. Keep up the good work :popcorn:

pugnator
Settled in member
Reactions:
Posts: 25
Joined: Wed Sep 28, 2016 6:05 pm
Bike owned: NC31
Location: Russia, Moscow
Contact:
Re: Show us your bike...

Post by pugnator » Tue Jan 15, 2019 1:55 pm

theEK1 wrote:
Fri Jan 11, 2019 10:44 pm
Amazing work and total dedication to this little underrated bike. I think, although the movement on this forum is quite slow, it would be awesome if you took some time and did a new topic about it on here, in English, so it would come up on g00gle when searching :roll: . I read everything on drive2 and 400ccm.ru. Hopefully will do some more work on my SF, and shall be able to share progress of it here. Keep up the good work :popcorn:
I'm working on good description in english, I have one in russian though. In spite of the fact I write a lot in english at work, I make a lot of stupid mistakes when it comes to something personal. I hope I finish it soon.


Post Reply

Return to “Superfour - Graphics & Style”