Hi all, first post on here so hello to you all.

I know most are probably bored of Koso help posts but this has stumped me.

I cannot get an RPM reading from anywhere!!!!

I have tried the lead off the coil, wrapping the HT lead, from the pulse generator and the stock rpm cable (behind the clocks) I have tried all configs of the Hi/Lo and cylinders and pistons and nowt is giving me anything.

I have power to the dash and am connecting to the correct brown RPM lead, good earth ect but nowt

I have two units both RX2 and two wiring harnesses but can’t get anything from either.

Any ideas????????

Thanks