CBR 400 NC29 Koso RPM I’m stumped!!!!!!

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
Linkpipe1
One Hit Wonder
Reactions:
Posts: 1
Joined: Wed Sep 26, 2018 6:57 pm
CBR 400 NC29 Koso RPM I’m stumped!!!!!!

Post by Linkpipe1 » Thu Sep 27, 2018 5:24 pm

Hi all, first post on here so hello to you all.

I know most are probably bored of Koso help posts but this has stumped me.

I cannot get an RPM reading from anywhere!!!!

I have tried the lead off the coil, wrapping the HT lead, from the pulse generator and the stock rpm cable (behind the clocks) I have tried all configs of the Hi/Lo and cylinders and pistons and nowt is giving me anything.

I have power to the dash and am connecting to the correct brown RPM lead, good earth ect but nowt

I have two units both RX2 and two wiring harnesses but can’t get anything from either.

Any ideas????????

Thanks


Post Reply

Return to “CBR - Workshop”