NC23 Non Starter

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
craigs6124
Settled in member
Reactions:
Posts: 3
Joined: Tue May 20, 2014 7:04 pm
Bike owned: CBR400RRJ NC23 1988
Location: Warrington, England
NC23 Non Starter

Post by craigs6124 » Mon Jul 23, 2018 2:07 pm

Hi

My '89 rrj nc23 won't start. It turns over ok but there is no spark. I've replaced the plug caps with recon items from Graeme France. The coils and pulse generators test ok with a meter, I've got a 12v supply (black/white wire) at the CDi socket and also a good earth (green wire). I purchased another CDi from Graeme but it doesn't start using that either. I've tried another wiring loom but still no good.

I'm starting to wonder if BOTH my CDi units are faulty.

Is there anyone in the North west, (preferably close to Warrington) who would let me try my CDi units on their working bike?

Has anyone any other ideas that I could try?

Thanks

Craig

dunkenb
Regular Member
Reactions:
Posts: 692
Joined: Wed Jun 03, 2009 9:39 pm
Bike owned: Cbr400rr nc29 type8 NSR250
Location: West Midlands
Re: NC23 Non Starter

Post by dunkenb » Sat Aug 04, 2018 8:53 am

Have you checked the pick up coil? And also check your kill switch, they’re notorious for causing problems like this .😎


Post Reply

Return to “CBR - Workshop”