Hi guys

After an epic weekend at cadwell there was one casualty. . .my right hand middle engine bolt and spacer.

Ooppps

Sitting between sessions I looked at the bike and thought, there isn’t usually hole in the frame there, shit!

So the one I’m talking about is the middle one on the right that goes through the frame spar and you can see through the fairing and it has a long old spacer between the frame and the engine, the bolts easy to replace but spacer not so much, if anyone has a spare one to sell then great!

If not I need the dimensions to get one made up, so if anyone happens to have a bike in bits that could measure the spacer I would be very grateful as it looks to be pretty tricky to try and measure it on the bike itself

Thanks guys

I have the bolt & spacer can post them up to you for £10

Yes! That’s awesome thanks, drop me a message with PayPal details and I’ll ping you some cash,

Thanks

Sam

Have a look at this link https://www.cmsnl.com/honda-cbr400rr-19 ... zE1S-t4WK0
Is it parts no. 22 & 11 you need?

Ah bugger its for an NC29 i'm looking for, my mistake for not stating in initial message, so its parts 30 and 11 im looking for:

https://www.cmsnl.com/honda-cbr400rr-19 ... zICD1WnFQI

Definitely can't help there - sorry

Not a problem, thanks for trying anyway