NC23 forks!! Air pressure ??
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Reactions:
- Posts: 15
- Joined: Sat Aug 26, 2017 9:26 am
- Bike owned: CBR 1100 XX, CBR 400 RR CBR
- Location: Stoke on Trent England
NC23 forks!! Air pressure ??
Hi
Now I have her running sweet as a nut....I am turning to the suspension.
There are shcrader valves (Tyre thingys) on top of the fork legs.
what is the correct pressure / amount of oil please ??
(I do like hard suspension)
Thanks in advance for any help
Geoff
Now I have her running sweet as a nut....I am turning to the suspension.
There are shcrader valves (Tyre thingys) on top of the fork legs.
what is the correct pressure / amount of oil please ??
(I do like hard suspension)
Thanks in advance for any help
Geoff
-
- NWAA Supporter
- Reactions:
- Posts: 465
- Joined: Thu Apr 09, 2015 1:55 pm
- Location: Gravesend
Re: NC23 forks!! Air pressure ??
I think the general advice these days is not to put any air in the forks. Anything more than a few PSI puts a strain on the fork seals and the air soon escapes unless everything is in perfect condition
If you need to uprate the forks then you should be looking at uprated spring or heavier oil
If you need to uprate the forks then you should be looking at uprated spring or heavier oil
-
- Settled in member
- Reactions:
- Posts: 34
- Joined: Sat Jul 25, 2009 5:27 pm
Re: NC23 forks!! Air pressure ??
I use a push bike small pump and through trial and error for the track I am now much more comfortable with 5/6 pumps, no problem with seals leaking.