Front brake master cylinder hose NC29

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
slyshot
Settled in member
Reactions:
Posts: 54
Joined: Wed Jan 29, 2014 12:56 pm
Front brake master cylinder hose NC29

Post by slyshot » Sun Apr 23, 2017 5:55 pm

Hi Everyone

The short rubber pipe connecting the front master cylinder reservoir to the master cylinder needs replacing on my cbr400 NC29 1990 model.

Had a look on CMSNL and found part number 45512-MR7-006 but unfortunately no longer in stock anywhere i can see.

So im wondering if this part of the braking system would require a low pressure hose compared to the lower brake lines as i can then get some low pressure hose fairly easily.

has anyone tried replacing this part before? at the moment this seems to be a decent alternative http://www.ebay.co.uk/itm/APS-Low-Press ... SwaNBUfMvD

Thanks for your help

Sam

tarus12
Settled in member
Reactions:
Posts: 8
Joined: Mon Dec 19, 2011 4:43 am
Re: Front brake master cylinder hose NC29

Post by tarus12 » Mon Apr 24, 2017 12:17 am

slyshot wrote:Hi Everyone

The short rubber pipe connecting the front master cylinder reservoir to the master cylinder needs replacing on my cbr400 NC29 1990 model.

Had a look on CMSNL and found part number 45512-MR7-006 but unfortunately no longer in stock anywhere i can see.

So im wondering if this part of the braking system would require a low pressure hose compared to the lower brake lines as i can then get some low pressure hose fairly easily.

has anyone tried replacing this part before? at the moment this seems to be a decent alternative http://www.ebay.co.uk/itm/APS-Low-Press ... SwaNBUfMvD

Thanks for your help

Sam
Hi Sam,

Yes it is only a low circuit as it comes from the brake fluid reservoir.

Cheers,

Kevin

Sent from my SM-G900I using Tapatalk


Post Reply