DIY FCR inlet boots
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
- Yakama
- Site Supporter
- Reactions:
- Posts: 2676
- Joined: Wed Apr 30, 2008 5:27 pm
- Bike owned: NC23s, 29, 30s, MC16
- Location: Oban
Re: DIY FCR inlet boots
But you would need to make the manifolds offset to compensate so they would need to be one off specific to these NC29 FCR's?
-
- Site Supporter
- Reactions:
- Posts: 581
- Joined: Tue Aug 16, 2011 3:10 pm
- Bike owned: MC22, 3TJ1
- Location: Thailand
- Contact:
Re: DIY FCR inlet boots
Yes, they almost all have that issue. When I said cut and fit I also meant cut and bend the tubes. Multiple cuts will give a smooth enough bend.
Carb seal kits in viton & other parts
https://litetek.co
https://litetek.co
- Yakama
- Site Supporter
- Reactions:
- Posts: 2676
- Joined: Wed Apr 30, 2008 5:27 pm
- Bike owned: NC23s, 29, 30s, MC16
- Location: Oban
Re: DIY FCR inlet boots
Ok what so is something we can get going then?
-
- Site Supporter
- Reactions:
- Posts: 581
- Joined: Tue Aug 16, 2011 3:10 pm
- Bike owned: MC22, 3TJ1
- Location: Thailand
- Contact:
Re: DIY FCR inlet boots
I am quite sure I saw rubbers and aluminium spigots for FCR's on Webike or similar. Maybe JB Power brand or genuine Keihin.
I am converting my own bike, an FZR400 3TJ1, from the one piece rubber parts to the same setup. I will be using the earlier model 1WG style rubbers that I have in Viton, http://www.litetek.co/InletManifoldRubb ... a_1WG.html and making blank spigots which I will also sell because they will fit all the bikes that use the same bodies.
I am converting my own bike, an FZR400 3TJ1, from the one piece rubber parts to the same setup. I will be using the earlier model 1WG style rubbers that I have in Viton, http://www.litetek.co/InletManifoldRubb ... a_1WG.html and making blank spigots which I will also sell because they will fit all the bikes that use the same bodies.
Carb seal kits in viton & other parts
https://litetek.co
https://litetek.co
-
- Settled in member
- Reactions:
- Posts: 219
- Joined: Thu May 01, 2008 6:19 am
- Bike owned: NC29, CBR6F2
- Location: Mareeba, Australia
Re: DIY FCR inlet boots
Selexon,selexon wrote:Hey All,
I have my original set of FCR rubber adapter on my bike.
More then happy to loan these to get the copied to help out.
Let me know if they are needed. And whom to talk to? That or i can possibly get them across to a rubber/plastic supplier I use in Italy and get them to supply a quote on costing.
I've found 2 places in Australia that should be able to replicate these for us. I''m happy to organise this if you are still willing to lend us your manifolds.
Matt
- Yakama
- Site Supporter
- Reactions:
- Posts: 2676
- Joined: Wed Apr 30, 2008 5:27 pm
- Bike owned: NC23s, 29, 30s, MC16
- Location: Oban
Re: DIY FCR inlet boots
I've managed to find a set so have contacted a company over here